HSG80 ACS Solution Software V8.6 for Windows NT and Windows 2000 Installation and Configuration Guide

Preparing the Host System 3–3
NOTE: Fibre channel cabling information is shown to illustrate supported configurations. In a
dual-bus disk enclosure configuration, disk enclosures 1, 2, and 3 are stacked below the
controller enclosure—two SCSI Buses per enclosure
(see Figure 3–1). In a single-bus disk
enclosure configuration, disk enclosures 6, 5, and 4 are stacked above the controller enclosure
and disk enclosures 1, 2, and 3 are stacked below the controller enclosure—one SCSI Bus per
enclosure(see Figure 3–2).
4. Connect the six VHDCI UltraSCSI bus cables between the controller and disk
enclosures as shown in Figure 3–1 for a dual bus system and Figure 3–2 for a single
bus system. Note that the supported cable lengths are 1, 2, 3, 5, and 10 meters.
1
3
2
5
6
4
7
8
CXO7383A