HP StorageWorks Enterprise Modular Library E-Series 71e Getting Started (AH876-96002, September 2007)

Keep the center door of the library open and turn the
center-door knob one-quarter turn counterclockwise to
raise the door-locking lever that is on the top of the
center door.
Power on the library
48
49
At the rear of the library, turn on the main power switch.
50
Close the center door of the library and turn the center-
door knob one-quarter turn clockwise to lock it.
NOTE: Your library might look different.
Attach the bar code labels
to the tape cartridges
46
Insert the tape cartridges
into the slots
47
Attach a bar code label to each tape cartridge. Place
the bar code label entirely within the recessed area.
At the front of the library, insert the tape cartridges into
the slots on the side walls inside the 8U base module.
0 0 0 2 2 0 L3
0 0 0 2 2 0 L4
0
0
0
2
2
0
L
3
CAUTION! Handle tape cartridges with care. Do not
drop or mishandle them, or place them near sources
of electromagnetic interference. Rough handling can
damage the tape cartridge making it unusable and
potentially hazardous to the tape drives.
CAUTION! The misuse and misunderstanding of
bar code technology can result in backup and
restore failures. To ensure that your bar codes meet
HP’s quality standards, always purchase them from
an approved supplier and never print bar code
labels yourself. For more information, see the order
form provided with the library, as well as the Bar
Code Label Requirements, Compatibility and
Usage white paper available from
http://www.hp.com/support.
IMPORTANT! Do not insert tape cartridges into the 4U
base module.
LTO2
LTO3
LTO4
Labels: