HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 119
4 - CONFIGURATION-MODE
C
OMMANDS
For detailed information about PFS, see the HP StorageWorks Enterprise File Services
WAN Accelerator Deployment Guide.
NOTE: To enable PFS you must have an HP EFS WAN Accelerator, Model DL320-1020,
DL320-2020, DL380-3010, or DL380-5010.
Syntax pfs auto-launch enable
Parameters
None
Example minna (config) # pfs auto-launch enable
pfs configure
Description Configures the file share on the HP EFS WAN Accelerator. To enable Proxy File
Service (PFS) support, you must have an HP EFS WAN Accelerator, Model DL320-
1020, DL320-2020, DL380-3010, or DL380-5010.
For detailed information about PFS, see the HP StorageWorks Enterprise File Services
WAN Accelerator Deployment Guide.
IMPORTANT: The HP EFS WAN Accelerator host name must be in the DNS database for the
HP EFS WAN Accelerator to join the domain. Host names with greater than 15 characters
prevent the HP EFS WAN Accelerator from joining the domain. Make sure your HP EFS WAN
Accelerator host name is less than 15 characters for PFS configurations.
Syntax pfs configure {realm <domain name>
login <user login> password <password>
[dc-name <domain controller>]}
Parameters
Example
minna (config) # pfs configure realm test login mylogin password
mypassword
minna (config) #
realm <domain
name>
Specifies the Windows 2000 or above domain. The HP EFS WAN
Accelerator host name must be in the DNS database for the HP EFS
WAN Accelerator to join the domain. Host names with greater than
15 characters prevent the HP EFS WAN Accelerator from joining the
domain. Make sure your HP EFS WAN Accelerator host name is less
than 15 characters for PFS configurations.
login <user login> Specifies the domain controller login.
password
<password>
Specifies the domain controller password.
dc-name <domain
controller>
Specifies the domain controller. The domain controller is optional.
You must specify the domain controller if it is located across the
WAN.