HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

142 4 - CONFIGURATION-MODE COMMANDS
radius-server retransmit
Description Specifies the number of times the client attempts to authenticate with any RADIUS
server. This command can be overridden in a radius-server host command. The no
command option resets the value to the default value.
Syntax radius-server retransmit <retries>
Parameters
Example
minna (config) # radius-server retransmit 5
minna (config) #
radius-server timeout
Description Sets the timeout for retransmitting a request to any RADIUS server. The range is 1-
60. The default value is 3. This command can be overridden in a radius-server host
command. The no command option resets the value to the default value.
Syntax radius-server timeout <seconds>
Parameters
Example
minna (config) # radius-server timeout 30
minna (config) #
segstore receive port
Description Receives the data store from another HP EFS WAN Accelerator. The failover HP EFS
WAN Accelerator must be the same model. You cannot preload a data store on a non-
failover HP EFS WAN Accelerator.
Syntax segstore receive port <port>
Parameters
Example
minna (config) # segstore receive port 20
minna (config) #
<retries> Specifies the number of times the client attempts to authenticate
with any RADIUS server. The range is 0-5. The default value is 1.
<seconds> Sets the timeout for retransmitting a request to any RADIUS
server. The range is 1-60. The default value is 3.
<port> Specifies the port number.