HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

156 4 - CONFIGURATION-MODE COMMANDS
Example minna (config) # tcp connection send keep-alive local-addr 10.0.0.0
local-port 1240 remote-addr 10.0.0.1 local-port 1300
minna (config) #
tcp connection send reset
Description Configures TCP connection tools for debugging HP EFS WAN Accelerators.
Terminates connections between HP EFS WAN Accelerators so that you can debug
connection problems in your network.
Syntax tcp connection send reset [both local-only local-addr <local IP addr> local-port
<port> remote-addr <remote IP addr> remote-port <port> |
local-only local-addr <local IP addr> local-port <port> remote-addr <remote IP
addr> remote-port <port> |
remote-only remote-addr <remote IP addr> remote-port <port> local-addr
<local IP addr> local-port <port>]
Example
minna (config) # tcp connection send reset local-only local-addr
10.0.0.0 local-port 1240 remote-addr 10.0.0.1 remote-port 1300
minna (config) #
tcp highspeed enable
Enables high-speed Transmission Control Protocol (HSTCP) which provides
acceleration and high throughput for high bandwidth networks where the WAN pipe is
large but latency is high. The no command option disables HSTCP.
HSTCP is activated for all connections that have a Bandwidth-Delay Product (BDP)
larger than 100 packets. If you have a BDP of greater than 512 KB and you are more
interested in filling the WAN pipe than saving bandwidth, you should consider
enabling HSTCP. HSTCP is available only on the HP EFS WAN Accelerator 5000 and
5010.
both local-only local-
addr <local IP addr>
local-port <port>
remote-addr <remote
IP addr> remote-port
<port>
Terminates the connection for the local and remote HP EFS WAN
Accelerators.
local-only local-addr
<local IP addr> local-
port <port> remote-
addr <remote IP
addr> remote-port
<port>
Terminates the connection for the local HP EFS WAN Accelerator.
remote-only remote-
addr <remote IP
addr> remote-port
<port> local-addr
<local IP addr> local-
port <port>
Terminates the connection for the remote HP EFS WAN Accelerator