HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 29
3 - ENABLE-MODE COMMANDS
 “show protocol ms-sql” on page 50
 “show protocol ms-sql rules” on page 50
 “show pfs all-info” on page 47
 “show pfs configuration” on page 47
 “show pfs state shares” on page 48
 “show pfs stats shares” on page 48
 “show qos rules” on page 51
 “show radius” on page 51
 “show raid diagram” on page 51
 “show raid error-msg” on page 52
 “show running-config” on page 52
 “show service” on page 52
 “show service authentication” on page 53
 “show service connection pooling” on page 53
 “show service neural-framing” on page 53
 “show snmp” on page 53
 “show ssh client” on page 54
 “show ssh server” on page 54
 “show stats” on page 54
 “show tacacs” on page 55
 “show tcp highspeed” on page 56
 “show terminal” on page 56
 “show usernames” on page 56
 “show version” on page 56
 “show wccp” on page 57
 “show web” on page 57
 “show web prefs” on page 57
 “slogin” on page 57
 “stats export” on page 58
configure terminal
Description Enables configuration from the terminal by entering the configuration subsystem. To
exit the configuration subsystem, type exit. The no command option disables terminal
configuration.
Syntax configure terminal