HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 39
3 - ENABLE-MODE COMMANDS
Model: 5010
Revision: A
Version: rapanui-flamebox
minna #
show in-path
Description Displays current in-path configuration settings.
Syntax show in-path
Parameters None
Example
minna # show in-path
Enabled: yes
Kickoff: yes
L4/PBR/WCCP (on wan0_0): no
Optimizations Enabled On:
inpath0_0
VLAN Tag IDs:
inpath0_0: 0
minna #
show in-path cdp
Description Displays Cisco Discovery Protocol (CDP) settings for failover deployments using
PBR to redirect traffic to the backup HP EFS WAN Accelerator.
Syntax show in-path cdp
Parameters None
Example
minna (config) # show in-path cdp
CDP Enabled: no
Interval: 10 seconds
Hold Time: 180 seconds
minna #
show in-path neighbor
Description Displays current connection forwarding settings. For detailed information, see “in-
path neighbor enable” on page 93.
Syntax show in-path neighbor
Parameters None
Example
minna # show in-path neighbor
Connection forwarding Enabled: no
Connection forwarding Port: 7850
Keepalive Count: 3
Keepalive Interval: 10