HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

52 3 - ENABLE-MODE COMMANDS
[=======][=======][=======][=======]
[ 5 ][ 6 ][ 7 ][ 8 ]
[=======][=======][=======][=======]
------------------------------------
[=======][=======][=======][=======]
[ 1 ][ 2 ][ 3 ][ 4 ]
[=======][=======][=======][=======]
series 5000 layout:
[=======][=======][=======][=======]
[ 9 ][ 10 ][ N/A ][ S ]
[=======][=======][=======][=======]
------------------------------------
[=======][=======][=======][=======]
[ 5 ][ 6 ][ 7 ][ 8 ]
[=======][=======][=======][=======]
-----------------------------------
[=======][=======][=======][=======]
[ 1 ][ 2 ][ 3 ][ 4 ]
[=======][=======][=======][=======]
show raid error-msg
Description Displays the RAID disk drives that are not functioning.
Syntax show raid error-msg
Parameters None
Example
minna # show raid error-msg
show running-config
Description Displays the running configuration. The show running-config full command
displays all settings, including those set to the default value.
Syntax show running-config [full]
Parameters
Example
minna # show running-config
(displays running configuration)
show service
Description Displays current state of the HP EFS WAN Accelerator service.
Syntax show service
Parameters None
full
Displays all settings, including those set to the default value.