HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

80 4 - CONFIGURATION-MODE COMMANDS
Syntax email notify failures recipient <email addr>
Parameters
Example
minna (config) # email notify failures recipient [e-mail]
minna (config) #
email send-test
Description Sends test email to all configured event and failure recipients.
Syntax email send-test
Parameters None
Example
minna (config) # email send-test
minna (config) #
failover buddy addr
Description Sets the failover IP address. The failover HP EFS WAN Accelerator is the backup HP
EFS WAN Accelerator. If the master HP EFS WAN Accelerator fails the failover HP
EFS WAN Accelerator takes over. The default value is 0.0.0.0. The no command
option resets the failover IP address to the default value.
Syntax failover buddy addr <addr>
Parameters
Example
minna (config) # failover buddy addr 10.10.10.1
minna (config) #
failover buddy port
Description Sets the buddy, failover port. The buddy HP EFS WAN Accelerator is the failover
(backup) HP EFS WAN Accelerator. If the master HP EFS WAN Accelerator fails the
failover HP EFS WAN Accelerator takes over. The default value is 7820. The no
command option resets the buddy, failover port to the default value.
Syntax failover buddy port <port>
recipient <email-addr> Specifies the email address of users to receive notification of
failures.
<addr> Specifies the IP address for the failover, backup appliance. The default
value is 0.0.0.0.