HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

86 4 - CONFIGURATION-MODE COMMANDS
Starting HP Lights-Out Drivers and Agents (hprsm): cpqci cpqrid
cpqriisd cmasm2d cmarackd
Starting cpqci:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting cpqrid:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting cpqriisd:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting RIB agent (cmasm2d):
Starting Rack agent (cmarackd):
Starting Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided
cmascsid cmasasd
Starting Storage Event Logger (cmaeventd):
Starting IDA agent (cmaidad):
Starting FCA agent (cmafcad):
Starting IDE agent (cmaided):
FATAL: Module sg not found.
Starting SCSI agent (cmascsid):
Starting SAS agent (cmasasd):
Starting NIC Agents (cmanic): All agents
Starting NIC Agent Daemon (cmanicd): [ OK ]
hpasm: Server Management is enabled
Starting HP Lights-Out Drivers and Agents (hprsm): cpqci cpqrid
cpqriisd cmasm2d cmarackd
Already started cpqci.
Starting cpqrid:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting cpqriisd:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting RIB agent (cmasm2d):
Starting Rack agent (cmarackd):
Starting NIC Agents (cmanic): All agents
Already started NIC Agent Daemon (cmanicd).
520 (config) #
hp agents start
Description Starts the HP System Management Homepage agents installed on the system. If the
System Management Homepage does not load properly, check the status of the agents
and stop, start, or restart as needed.
Syntax hp agents start
Parameters None
Example
520 (config) # hp agents start
Stopping hpsmhd:
Starting hpsmhd:
hpsmhd: Could not determine the server's fully qualified domain name,
using 0.0.2.8 for ServerName
ESC[60G[ ESC[1;32mOKESC[0;39m ]
The hp ProLiant Memory Hotplug module is not available
for this Linux kernel: 2.6.10-1.760rbtSMP
Looking for sources to build 2.6.10-1.760rbtSMP
ls: /lib/modules/2.6.10-1.760rbtSMP/build/include/linux/version.h: No