HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)
HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 87
4 - CONFIGURATION-MODE
C
OMMANDS
such file or directory
ls: /boot/vmlinuz.version.h: No such file or directory
/lib/modules/2.6.10-1.760rbtSMP/build/include/linux/version.h does not
exist
Please load the appropriate sources to rebuild module.
Starting Proliant System Health Monitor (hpasmd):
Starting Foundation Agents (cmafdtn): cmathreshd cmahostd cmapeerd
Starting Threshold agent (cmathreshd):
Starting Host agent (cmahostd):
Starting SNMP Peer (cmapeerd):
Starting Server Agents (cmasvr): cmastdeqd cmahealthd cmaperfd
Starting Standard Equipment agent (cmastdeqd):
Starting Health agent (cmahealthd):
Starting Performance agent (cmaperfd):
Starting HP Lights-Out Drivers and Agents (hprsm): cpqci cpqrid
cpqriisd cmasm2d cmarackd
Starting cpqci:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting cpqrid:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting cpqriisd:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting RIB agent (cmasm2d):
Starting Rack agent (cmarackd):
Starting Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided
cmascsid cmasasd
Starting Storage Event Logger (cmaeventd):
Starting IDA agent (cmaidad):
Starting FCA agent (cmafcad):
Starting IDE agent (cmaided):
FATAL: Module sg not found.
Starting SCSI agent (cmascsid):
Starting SAS agent (cmasasd):
Starting NIC Agents (cmanic): All agents
Starting NIC Agent Daemon (cmanicd): [ OK ]
hpasm: Server Management is enabled
Starting HP Lights-Out Drivers and Agents (hprsm): cpqci cpqrid
cpqriisd cmasm2d cmarackd
Already started cpqci.
Starting cpqrid:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting cpqriisd:ESC[60G[ ESC[1;32mOKESC[0;39m ]^M
Starting RIB agent (cmasm2d):
Starting Rack agent (cmarackd):
Starting NIC Agents (cmanic): All agents
Already started NIC Agent Daemon (cmanicd).
520 (config) #
hp agents status
Description Indicates the status of the HP System Management Homepage agents installed on the
system. If the System Management Homepage does not load properly, check the
status of the agents and stop, start, or restart as needed.
Syntax hp agents status