HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

100 4 - CONFIGURATION-MODE COMMANDS
in-path peering move-rule
Description Moves an in-path peering rule in serial cluster deployments.
Syntax in-path peering move-rule <rulenum> to <rulenum>
Parameters
Example
minna (config) # in-path peering move-rule 3 to 1
in-path rule auto-discover
Description Adds an in-path, auto-discovery rule. The HP EFS WAN Accelerator automatically
intercepts and optimizes traffic on all IP addresses (0.0.0.0) and ports (all). The no
command option disables the in-path auto-discover rule. The no command option has
the following syntax: no in-path <rulenum>.
Syntax in-path rule auto-discover {[scraddr <addr>] | [dstaddr <addr>] |
[dstport <port>]} | [neural-mode <mode>] | [optimization <policy>] |
[vlan <vlan tag ID>] | [rulenum <rulenum>]
Parameters
<rulenum> Specifies the rule number.
srcaddr <addr> Specifies the source network for this rule. For example:
10.0.0.3/24
dstaddr <addr> Specifies the destination network for this rule. For example:
10.0.0.0/24
dstport <port> Specifies the destination port for this rule. The destination port can
be a single port (number), a port label, or all specifies all ports.