HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP StorageWorks Enterprise File Services (EFS) DL320-2020 WAN Accelerator

121

122

123

124

125

126

127

128

129

130

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 123

4 - CONFIGURATION-MODE

OMMANDS

Example minna (config) # pfs auto-launch enable

pfs configure

Description Configures the proxy file share on the HP EFS WAN Accelerator.

PFS is not supported on the Model 500, 510. These models do not have the necessary

disk capacity to perform PFS. PFS supports only Windows 2000 and above domains

For detailed information about PFS, see the HP StorageWorks Enterprise File Services

WAN Accelerator Deployment Guide.

IMPORTANT: The HP EFS WAN Accelerator host name must be in the DNS database for the

HP EFS WAN Accelerator to join the domain. Host names with greater than 15 characters

prevent the HP EFS WAN Accelerator from joining the domain. Make sure your HP EFS WAN

Accelerator host name is less than 15 characters for PFS configurations.

Syntax pfs configure {realm <domain name>

[dc-name <domain controller>]}

Parameters

Example

minna (config) # pfs configure realm test login mylogin password

mypassword

minna (config) #

pfs enable

Enables PFS support. PFS provides fast access to local files, accelerated access to files

requiring SMB signing and continuous access to files in the event of WAN disruption.

PFS allows you to store local copies of files at the remote site in an integrated virtual

file server resident on the HP EFS WAN Accelerator. PFS supports only Windows

2000 and above domains.

realm <domain

name>

Specifies the Windows 2000 or above domain. The HP EFS WAN

Accelerator host name must be in the DNS database for the HP EFS

WAN Accelerator to join the domain. Host names with greater than

15 characters prevent the HP EFS WAN Accelerator from joining the

domain. Make sure your HP EFS WAN Accelerator host name is less

than 15 characters for PFS configurations.

password

Specifies the domain controller password.

dc-name <domain

controller>

Specifies the domain controller. The domain controller is optional.

You must specify the domain controller if it is located across the

WAN.