HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

130 4 - CONFIGURATION-MODE COMMANDS
pfs share verify
Description Verifies a PFS share.
Syntax pfs share verify local-name <local name>
Parameters
Example
minna (config) # pfs share verify local-name test
minna (config) #
pfs start
Description Starts the PFS service.
Syntax pfs start
Parameters
None
Example minna (config) # pfs start
minna (config) #
port-label
Description Sets a port label for a series of ports. The no command option disables the port label.
Port labels are not case sensitive and can be any string consisting of letters, numbers,
underscore ( _ ), or a hyphen ( - ).
Syntax port-label <label> <port> [Interactive <port>| Secure <port>]
Parameters
Usage You can use the port-label FOO port <port> command to change ports in a port
label. For example you define port label FOO by issuing following the command.
local-name
<local name>
Specifies the name of the share.
<label> Specifies the name of the port label. Port labels are not case sensitive and
can be any string consisting of letters, numbers, underscore ( _ ), or a
hyphen ( - ).
<port> Specifies a comma-separated list of ports and ranges of ports. For
example: 22,443,990-995,3077-3078
Interactive
<port>
Specifies the interactive port for which you do not want to automatically
forward traffic on. For a list of ports that are automatically forwarded by
default, see Appendix B, “HP EFS WAN Accelerator Ports.”
Secure <port> Specifies the secure port for which you do not want to automatically
forward traffic on. For a list of ports that are automatically forwarded by
default, see Appendix B, “HP EFS WAN Accelerator Ports.”