HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Deployment Guide (407118 - 003, June 2006)

102 9 - RADIUS AND TACACS+ AUTHENTICATION
The HP EFS WAN Accelerator does not have the ability to set a per interface
authentication policy. The same authentication method list is used for all interfaces
(that is, default). You cannot configure authentication methods with subsets of the
RADIUS or TACACS+ servers specified (that is, there are no server groups).
The following CLI commands are available for RADIUS and TACACS+
authentication:
 Authentication
 aaa authentication login default
 aaa authorization map default-user
 aaa authorization map order
 show authentication method
 RADIUS Configuration
 radius-server host
 radius-server key
 radius-server retransmit
 radius-server timeout
 TACACS+ Configuration
 tacacs-server host
 tacacs-server key
 tacacs-server retransmit
 tacacs-server timeout
 show tacacs
 User Accounts
 username privilege
 username nopassword
 username password
 username password 0
 username password 7
 username password cleartext
 username password encrypted
 username disable