HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Deployment Guide (407118 - 003, June 2006)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.7 DEPLOYMENT GUIDE 107

9 - RADIUS AND TACACS+

UTHENTICATION

Configuring RADIUS Authentication

in the HP EFS WAN Accelerator

The following section provides the basic steps for configuring RADIUS authentication

in the HP EFS WAN Accelerator.

Configuring

RADIUS

Authentication

The following section describes the basic steps for configuring RADIUS

authentication in the HP EFS WAN Accelerator.

You prioritize RADIUS authentication methods for the system and set the

authorization policy and default user.

IMPORTANT: Make sure to put the authentication methods in the order in which you want

authentication to occur. If authorization fails on the first method, the next method is attempted,

and so forth, until all the methods have been attempted.

Basic Steps 1. Configure the HP EFS WAN Accelerator. For detailed information, see the HP

StorageWorks Enterprise File Services WAN Accelerator Installation and

Configuration Guide.

2. Connect to the Management Console. For detailed information, see the HP

StorageWorks Enterprise File Services WAN Accelerator Installation and

Configuration Guide.

3. Navigate to the Setup: Authentication - General Settings page in the Management

Console.

4. Define the default login and the authentication methods. Make sure you put the

authentication methods in the order in which you want them to occur. If