HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Management Console User Guide (392359-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 53
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
To modify the host
name
1. Click the Setup tab to display the Setup menu.
2. Click Host Settings in the left menu to expand the Host Settings menu.
3. Click Hostname to display the Host Settings - Hostname page.
Figure 2-14. Host Settings - Hostname Page
4. Modify the text in the Hostname text box to change the hostname.
5. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before committing it to memory.)
6. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
Mapping Hosts
to IP Addresses
You can map a host name to IP addresses in the Host Settings - Hosts page.
Specify these values only if you are not using DNS to resolve host names and IP
addresses in your system (or if the host does not have a DNS entry).