HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

98 4 - CONFIGURATION-MODE COMMANDS
Example minna (config) # failover buddy port 2515
minna (config) #
failover enable
Description Enables failover support. Failover support enables a failover (backup) HP EFS WAN
Accelerator so that if the master HP EFS WAN Accelerator fails, the traffic is routed
automatically through the failover (backup) HP EFS WAN Accelerator.
Valid values must exist for the port, buddy address, and buddy port before this
command can complete.
The no command option disables failover support.
Syntax [no] failover enable
Parameters None
Example
minna (config) # failover enable
minna (config) #
failover master
Description Sets this HP EFS WAN Accelerator as the primary or master HP EFS WAN
Accelerator. If the master HP EFS WAN Accelerator fails, the traffic is routed
automatically through the failover (backup) HP EFS WAN Accelerator. The default
value is true.
The no command option sets this HP EFS WAN Accelerator as the failover (backup)
HP EFS WAN Accelerator.
Syntax [no] failover master
Parameters None
Example
minna (config) # failover master
minna (config) #
failover port
Description Sets the local failover port. The failover HP EFS WAN Accelerator is the backup HP
EFS WAN Accelerator. The default value is 7820.
The no command option resets the local failover port to the default value.
Syntax [no] failover port <port>
Parameters
<port> Specifies the port number.