HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

120 4 - CONFIGURATION-MODE COMMANDS
ip domain-list
Description Adds a domain name to the domain list for resolving host names.
The no command option removes a domain from the domain list.
Syntax [no] ip domain list <domain>
Parameters
Example
minna (config) # ip domain-list example.com
minna (config) #
ip flow-export
Description Configures NetFlow support.
NetFlow enables you to export network statistics that provide information about
network users and applications, peak usage times, and traffic routing. NetFlow records
information for each packet ingressing the specified network interface. This data is
then sent to a NetFlow collector, a software package provided by a third party vendor
or an open source.
IMPORTANT: Enabling NetFlow could adversely impact HP EFS WAN Accelerator
performance and increase bandwidth utilization.
Syntax ip flow-export {<interface>
destination <address> <port>
export-port [aux | primary]
capture [optimized | passthru | all]
lan-addrs [off | on]}
Parameters
<domain> Specifies the domain name.
<interface>
Specifies the interface for Netflow collection:
lan0-N, wan0-N, or primary.
destination <address>
<port>
Specifies the export IP address and port the NetFlow
collector is listening on. The default value is 2055.
export-port <aux |
primary>
Specifies the interface which is used to send the Netflow
packets to the collector. NetFlow records sent from the
HP EFS WAN Accelerator will appear to be sent from
the IP address of the selected interface.