HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 147
4 - CONFIGURATION-MODE
C
OMMANDS
pfs start
Description Starts the PFS service.
Syntax pfs start
Parameters None
Example
minna (config) # pfs start
minna (config) #
pfs workgroup account
Description Sets a local workgroup account for the PFS share. If you configure PFS in Workgroup
mode, the HP EFS WAN Accelerator does not need to join a domain. Workgroup
accounts are used by clients when they connect to the HP EFS WAN Accelerator to
access PFS shares.
Syntax pfs workgroup account {add user-name <name> password <password> | join
<workgroup> | leave}
Parameters
Example
minna (config) # pfs workgroup join test
minna (config) #
port-label
Description Sets a port label for a series of ports. Port labels are names given to sets of port
numbers. You use port labels to simplify configuration and reporting tasks you
perform with the HP EFS WAN Accelerator Manager. For example, you can create
port labels to define a set of ports for which the same in-path, load-balancing, or QoS
rules apply.
The HP EFS WAN Accelerator automatically discovers all the ports in the system that
have traffic. The discovered port along with a label (if one exists) is added to the
Traffic Summary report. If a label does not exist then an unknown label is added to
the discovered port.
add username
<name>
password
<password>
Adds a user account for the workgroup. Specify the login and password
to create a local workgroup account so that users can connect to the HP
EFS WAN Accelerator to access PFS shares.
join
<workgroup>
Joins the specified workgroup. If you configure PFS in workgroup mode
the HP EFS WAN Accelerator does not need to join a domain. Work
group accounts are used by clients when they connect to the HP EFS
WAN Accelerator to access PFS shares.
leave Leaves the workgroup.