HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 199
4 - CONFIGURATION-MODE
C
OMMANDS
web http enable
Description Enables the HTTP. The default value is true.
The no command option disables the HP EFS WAN Accelerator Manager.
Syntax [no] web http enable
Parameters None
Example
minna (config) # web http enable
minna (config) #
web http port
Description Sets the Web port.
The no command option resets the Web port to the default value.
Syntax [no] web http port <port>
Parameters
Example
minna (config) # web http port 8080
minna (config) #
web httpd listen enable
Description Enables Web interface restrictions to this system.
The no command option disables Web interface restrictions which causes the Web to
accept connections from all interfaces.
After you have enabled interface restrictions, you must specify which interfaces to
accept connections using the web http listen interface command. If the list of
interfaces is empty, all interfaces are accepted. If the list of interfaces has at least one
entry, then the server only listens on that subset of interfaces.
NOTE: This option is available in the CLI only.
Syntax [no] web http listen enable
Parameters None
Example
minna (config) # web http listen enable
minna (config) #
<port> Specifies the port number. The default value is 80.