HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 43
3 - ENABLE-MODE COMMANDS
show in-path ar-circbuf
Description Displays the buffer of the last n connections that were not optimized due to
asymmetric routing (AR) (if any).
Syntax show in-path ar-circbuf
Parameters None
Example
minna # show in-path ar-circbuf
Nothing present
minna #
show in-path asym-route-tab
Description Displays the asymmetric routing table.
Syntax show in-path asym-route-tab
Parameters None
Example
minna # show in-path asym-route-tab
minna #
show in-path cdp
Description Displays Cisco Discovery Protocol (CDP) settings for failover deployments using
Policy-Based Routing (PBR) to redirect traffic to the backup HP EFS WAN
Accelerator.
Syntax show in-path cdp
Parameters None
Example
minna (config) # show in-path cdp
CDP Enabled: no
Interval: 10 seconds
Hold Time: 180 seconds
minna #
show in-path neighbor
Description Displays current connection forwarding settings.
Syntax show in-path neighbor
Parameters None
Example
minna # show in-path neighbor
Connection forwarding Enabled: no
Connection forwarding Port: 7850