HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 47
3 - ENABLE-MODE COMMANDS
Parameters None
Example
minna # show ip flow-export
Enabled: no
minna #
show ip security
Description Displays IP Security Protocol (IPSec) settings. IPsec security support must also be
running when IP security is enabled. If both are not enabled, a problem can result with
your security settings.
Syntax show ip security
Parameters None
Example
minna # show ip security
IP security enabled: yes
PFS enabled: yes
IKE rekeying interval: 240
Encryption policy: des
Authentication policy: hmac_md5
IP security is ru
show ip security peers
Description Displays IPsec security settings for peer HP EFS WAN Accelerators. The show ip
security peers command displays a static configuration and might not reflect actual
IPsec connections that are established. If a connection has not been made between the
two HP EFS WAN Accelerators that are configured to use IPsec security, then it does
not display the peer HP EFS WAN Accelerator because a security association has not
yet been established.
Syntax show ip security peers
Parameters None
Example
minna # show ip security peers
Peer Crypt Auth State Duplex Created
10.11.24.4 des-cbc hmac-md5 mature full Jun 23 11:32:52
show job
Description Displays scheduled jobs.
Syntax show job <job-id>
Parameters
<job-id> Specifies the job identification number.