HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 65
3 - ENABLE-MODE COMMANDS
Alarm admission_mem: ok
Alarm bypass: ok
Alarm cpu_util_indiv: ok
Alarm critical_temp: ok
Alarm fs_mnt: ok
Alarm halt_error: ok
Alarm linkstate: (disabled)
Alarm paging: ok
Alarm rcu_error: ok
Alarm service_error: ok
Alarm store_corruption: ok
Alarm sw-version: ok
Alarm warning_temp: ok
Alarm license-status: ok
(this is a partial example)
show tacacs
Description Displays Terminal Access Controller Access Control System (TACACS+) settings.
Syntax show tacacs
Parameters None
Example
minna # show tacacs
TACACS+ defaults:
key:
timeout: 3
retransmit: 1
No TACACS+ servers configured.
show tcp highspeed
Description Displays high-speed TCP (HSTCP) settings. The HSTCP feature is only available on
the HP EFS WAN Accelerator, Series 5000.
Syntax show tcp highspeed
Parameters None
Example
minna # show tcp highspeed
High Speed TCP license found: no
High Speed TCP enabled: no
show tcp reordering
Description Displays TCP reordering information.
Syntax show tcp reordering
Parameters None
minna # show tcp reordering
TCP reordering enabled: no
TCP reordering threshold: 3