HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 75
4 - CONFIGURATION-MODE
C
OMMANDS
 “file stats upload” on page 99
 “file tcpdump” on page 100
 “file tcpdump delete” on page 100
 “file tcpdump upload” on page 100
 “hardware ecc-mem-check enable” on page 101
 “hardware upgrade model” on page 101
 “hostname” on page 101
 “image boot” on page 102
 “image delete” on page 102
 “image fetch” on page 102
 “image install” on page 103
 “image move” on page 103
 “in-path asym-route-tab flush” on page 103
 “in-path asym-route-tab remove” on page 103
 “in-path asymmetric routing detection enable” on page 104
 “in-path asymmetric routing pass-through enable” on page 104
 “in-path cdp enable” on page 105
 “in-path cdp holdtime” on page 105
 “in-path cdp interval” on page 105
 “in-path enable” on page 106
 “in-path interface enable” on page 106
 “in-path interface vlan tag” on page 106
 “in-path kickoff” on page 107
 “in-path neighbor allow failure” on page 107
 “in-path neighbor enable” on page 108
 “in-path neighbor ip address” on page 109
 “in-path neighbor keepalive count” on page 109
 “in-path neighbor keepalive interval” on page 110
 “in-path neighbor port” on page 110
 “in-path oop enable” on page 110
 “in-path peering rule” on page 111
 “in-path peering move-rule” on page 112
 “in-path rule auto-discover” on page 112
 “in-path rule deny” on page 114
 “in-path rule discard” on page 114
 “in-path rule fixed-target” on page 115