HP StorageWorks ESL E-Series e2400-FC 2Gb Interface Controller Upgrade (AA928-96014, October 2007)

20
Power on the library.
a. Verify that power cables are firmly in place.
b. Press the power button located on the front of
the library.
c. After several minutes, verify that the current
state of the library appears in the System
State display on the OCP (System On-line
or System Off-line).
19
Flip the two breaker switches on at the power
distribution unit.
ACT/
LNK
ACT/
LNK
PORT 1 PORT 0 ETHERNET
SERIAL
PWR
FIBRE
CHANNEL
FIBRE
CHANNEL
ACT/
LNK
PORT 2
FIBRE
CHANNEL
ACT/
LNK
ACT/
LNK
PORT 1 PORT 3
FIBRE
CHANNEL
FIBRE
CHANNEL
ACT/
LNK
PORT 2
FIBRE
CHANNEL
ACT/
LNK
ACT/
LNK
PORT 1 PORT 0 ETHERNET
SERIAL
PWR
FIBRE
CHANNEL
FIBRE
CHANNEL
ACT/
LNK
PORT 2
FIBRE
CHANNEL
ACT/
LNK
ACT/
LNK
PORT 1 PORT 0
FIBRE
CHANNEL
FIBRE
CHANNEL
ACT/
LNK
PORT 2
FIBRE
CHANNEL
ACT/
LNK
ACT/
LNK
PORT 1 PORT 0 ETHERNET
SERIAL
PWR
FIBRE
CHANNEL
FIBRE
CHANNEL
ACT/
LNK
PORT 2
FIBRE
CHANNEL
ACT/
LNK
ACT/
LNK
PORT 1 PORT 3
FIBRE
CHANNEL
FIBRE
CHANNEL
ACT/
LNK
PORT 2
FIBRE
CHANNEL
Verify that the power LED and Fibre link LEDs on
the controller are solid green. The link LEDs
indicate a good connection.
21
Close the back door of the library.
22
Configuration
23
Use HP StorageWorks Interface Manager
command-line interface or HP StorageWorks
Command View TL to verify detection of the
new controller, and to perform configuration
and firmware updates.
Refer to the HP StorageWorks Interface
Manager and Command View TL User Guide
for detailed procedures.
Getting help
• HP product information:
ht
tp://www.hp.com/go/storage
• HP technical support and phone numbers:
ht
tp://w
ww.hp.com/support
• HP StorageWorks Library and Tape Tools
(L&TT) diagnostic software:
ht
tp://www.hp.com/support/tapetools
• Interface Manager and HP StorageWorks
Command View TL:
ht
tp://www.hp.com/support/cvtl
• HP manuals:
ht
tp://www.hp.com/support/manuals