HP StorageWorks ESL E-Series Tape Library Unpacking and Installation Guide (350800-011, May 2010)
Table Of Contents
- HP StorageWorks ESL E-Series Tape Library
- 1 Unpacking the library
- 2 Installing the library
- 3 Loading tape cartridges
- 4 Configuring the library
- 5 Support and other resources
- Index
6. From the front of the library, remove the foam from the Y-axis cover plate and from the left front
door. From the back of the library, remove the foam from the back door frame (see Figure 15).
Store the foam in case you need to relocate the library in the future.
2. Foam on front of library1. Foam on back of library
Figure 15 Removing the shipping foam
.
Unpacking the library24