HP StorageWorks ESL E-Series Tape Library Unpacking and Installation Guide (350800-011, May 2010)

b. Pull out the load port to expose the middle and lower shipping restraints (see Figure 22).
2. Middle shipping restraint1. Upper shipping restraint
4. Load port latching mechanism3. Lower shipping restraint
Figure 22 Removing the panel shipping restraints
.
c. Using a #2 Phillips screwdriver, remove the middle and lower panel shipping restraints.
d. Close the load port.
e. Locate the upper shipping restraint above the upper panel (see Figure 22) and remove it
using a #2 Phillips screwdriver.
f. Repeat for the panels on the other side of the library cabinet.
Unpacking the library30