HP StorageWorks ESL E-Series Tape Library Tape Drive Upgrade Instructions (December 2005)

Installation
Remove the plate that covers the drive bay in
which the drive will be installed.
Slide the
upgrade
drive half-way
into the drive
cluster.
6
78
5
10
If the drive cluster did not power itself on
when the drive was inserted, use the OCP
to power on the cluster.
Using the OCP, power off the cluster into
which the drive will be installed.
Attach the SCSI cable to the new drive module.
Note: The cable should already be in
place from the interface controller
installation procedure.
9
Slide the drive the rest of the way into
the cluster and tighten the captive screw.