HP StorageWorks 3000/5000 Enterprise Virtual Array Connectivity 3.1A for Novell NetWare Release Notes (5697-6382, June 2007)

HP StorageWorks 3000/5000

Enterprise Virtual Array connectivity

3.1A for Novel

l NetW are release notes

Part number: 5697-6382

irst edition: June 2007

PAGE 1
HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity 3.
PAGE 3
Version: 3.110 Description This document describes Novell NetWare operating system connectivity for HP StorageWorks 3000/5000 Enterprise Virtual Array (EVA3000/5000) controller software. A complete library of EVA3000/5000 documentation is available on the HP support website: http://www.hp.com/support/manuals Under storage, click Disk Storage Systems and then select either HP StorageWorks 3000 Enterprise Virtual Array or HP StorageWorks 5000 Enterprise Virtual Array under EVA Disk Arrays.
PAGE 4
Single-path support Novell NetWare servers require a single Fibre Channel Adapter (FCA) to support single-path mode. NOTE: Single-path mode should not be used in mission-critical environments. Compatibility/Interoperability Switch support This release supports the Fibre Channel switches and firmware versions listed in the HP StorageWorks SAN design reference guide, which can be downloaded from the HP support website: http://www.hp.
PAGE 5
Changing the name of a disk enclosure Changing the name of a disk enclosure is not supported with the SSSU or with Command View EVA. If you try to change a disk enclosure name using SSSU, the following error message appears: Error: Invalid Operation Using the proper service pack with the SSSU Ensure that the required service pack is installed if you are using sssunlm.nlm on Novell NetWare. Otherwise, a critical failure occurs on the second run.