HP StorageWorks 3000/5000 Enterprise Virtual Array Connectivty 3.1A for Sun Solaris Release Notes (5697-6384, June 2007)

ManualsBrandsHP ManualsStorageHP StorageWorks EVA3000 EMEA Bundles

HP StorageWorks 3000/5000

Enterprise Virtual Array connectivity

3.1A for Sun So

laris release notes

Part number: 5697-6384

irst edition: June 2007

Summary of content (7 pages)

PAGE 1
HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity 3.
PAGE 3
Version: 3.110 Description This document describes Sun Solaris operating system connectivity for HP StorageWorks 3000/5000 Enterprise Virtual Array (EVA3000/5000) controller software. A complete library of EVA3000/5000 documentation is available on the HP support website: http://www.hp.com/support/manuals Under storage, click Disk Storage Systems and then select either HP StorageWorks 3000 Enterprise Virtual Array or HP StorageWorks 5000 Enterprise Virtual Array under EVA Disk Arrays.
PAGE 4
Table 1 Supported platforms Platform Sun Fire (SPARC) Sun Enterprise (SPARC) V120 V210 V240 V440 V480 V490 V880 V890 V1280 280R E2900 E4900 E6900 SunFire 12K SunFire 15K PCI only 3800 cPCI only 4800 4810 6800 PCI and/or cPCI with cPCI module 12K 15K PCI only (FCA2257P) 3000 3500 4000 4500 5000 5500 6000 6500 10000 PCI and/or sBus Check customer configuration 220R 250 420R 450 PCI only Operating systems Table 2 lists the operating system specifications.
PAGE 5
Table 2 Operating system specifications OS version FCA (HBA) Clustering FCA2257P FCA2257S QLA2310F Adapter firmware version (minimum) Adapter driver version (minimum) 2.2.6 3.2.15 3.2.15 4.13.01 FCA2257C FCA2257S FCA2257P QLA2310F 2.2.6 2.2.6 3.2.15 3.3.12 4.13.01 4.20 9 SunCluster 3.1 PrimeCluster Veritas Cluster Server 3.5 Veritas Cluster Server 4.0 FCA2257C FCA2257S FCA2257P QLA2310F 2.2.6 3.2.15 3.3.12 4.13.01 4.20 10 None FCA2257P 3.2.12 3.2.15 4.20 6, 7 SunCluster 2.
PAGE 6
Sun Solaris 10 requires the minimum version of Secure Path (3.0D SP1). Single-path support A Sun Solaris server requires a single Fibre Channel Adapter (FCA) to support single-path mode. NOTE: Single-path mode should not be used in mission-critical environments. To configure Sun Solaris in single-path mode, you must use HSG80 Solution Software 8.7A for Sun Solaris connectivity.
PAGE 7
Codeload usage When a maximally configured system is running at maximum load, Secure Path timing constraints make codeload functionality ineffective. The system may time-out before codeload is complete. Therefore, you should perform VCS upgrades at an off-peak time. SSSU Changing comments on a disk enclosure Use Command View EVA to change comments on a disk enclosure.