HP StorageWorks Cable Management Spool Option Kit V1.0 Installation Instructions (EK-CMSOK-IG. A01, October 2003)

hp StorageWorks
Cable Management
Spool Option Kit
Version: 1.0
Cable Management Spool Option Kit Installation Instructions
First Edition (October 2003)
Part Number: EK–CMSOK–IG. A01
© Copyright 2003 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company makes no warranty of any kind with regard to
this material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard shall
not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this
material.
This document contains proprietary information, which is protected by
copyright. No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent of
Hewlett-Packard. The information contained in this document is subject to
change without notice.
Product names mentioned herein may be trademarks of their respective
companies, as reflected by an associated footnote.
Hewlett-Packard Company shall not be liable for technical or editorial
errors or omissions contained herein. The information is provided “as is”
without warranty of any kind and is subject to change without notice. The
warranties for Hewlett-Packard Company products are set forth in the
express limited warranty statements for such products. Nothing herein
should be construed as constituting an additional warranty.
Printed in the U.S.A.
Installation
Instructions
Read instructions completely before
beginning the installation procedure
About this Document
This document provides instructions for installation of cable
management spools on the internal mounting rail of the
Enterprise Virtual Array 5000 cabinet.
Installing the Cable Management Spool
Option Kit
A flathead screwdriver is the only tool required to complete
this procedure.
Use the following procedure to install the cable management
spool in the Enterprise Virtual Array 5000 cabinet.
1. Unlock the twist lock on the cable management spool with
a flathead screwdriver.
2. Position the spool so that the twist lock is inserted into the
internal mounting rail hole, as shown in Figure 1.
Figure 1: Positioning the spool
3. Secure the cable management spool to the internal
mounting rail by locking the twist lock into place with the
flathead screwdriver, as shown in Figure 2.
Figure 2: Securing the spool to the rail
CXO8254A
CXO8255A