HP StorageWorks 3000/5000 Enterprise Virtual Array release notes (VCS 4.
Legal and notice information © Copyright 2006-2007 Hewlett-Packard Development Company, L.P.
Version: 4.007 Description This document contains the most recent product information for an HP StorageWorks Enterprise Virtual Array 3000/5000 running VCS 4.007. Much of the information included here is not documented elsewhere, so it is recommended that you read this information thoroughly before installing and operating the EVA3000/5000. Update recommendation Recommended Upgrade paths The upgrade paths to VCS 4.007 are listed in Table 1. When upgrading to VCS 4.
Fixes The following issues have been resolved in VCS 4.007: • Resolved an instance where the loop recovery process could cause a controller to terminate unexpectedly. • Resolved an issue that could lead to a controller restart due to a resource allocation issue when Management commands, used to gather data about virtual disk status, are used many times. • Resolved an issue where controller events indicating missing data were logged frequently.
VCS Media Kit for dual HSV controllers The following items are included in the HP StorageWorks EVA3000/5000 Series 4.0 Controller Media Kit: • Upgrade License • HP StorageWorks EVA3000/5000 VCS 4.007 system software CD. Also included on this media is VCS 3.028. • HP StorageWorks Enterprise Virtual Array 3000/5000 Documentation CD HP StorageWorks Command View EVA 5.0.3 or 6.0.2 is required to access all the features and benefits provided by VCS 4.007. NOTE: The EVA3000/5000 ships with VCS 3.
cycle, Fibre Channel drives. Doing so could shorten the life of the drive. Download the following document for more information on FATA drives, their uses and benefits: http://h71028.www7.hp.com/ERC/downloads/5982-7353EN.
HP model displayed in HP Command View EVA Minimum supported firmware version Recommended firmware version ND2505823A HP00 HP04 ND25058238 HP00 HP04 400GB NB40059392 HP02 HP03 500GB NB50058855 HP02 HP03 Fibre Channel disk 250GB Important notes and workarounds This section identifies important notes and workarounds specific to the EVA3000/5000 hardware and VCS software.
• All EVA 4000/6000/8000 storage systems must be running only one version of XCS (5.100 or later). • If you need to update both VCS and XCS, do not attempt to upgrade both simultaneously. Complete the upgrade of one family of firmware before upgrading the other. • Suspend DR group replication for the duration of the upgrade process on the destination, even if the intersite links are not available. A codeload of one controller forces both controllers on a storage system to reboot.