8x00 Enterprise Virtual Array updating product software guide (XCS 6.200) (5697-7958, February 2009)

3. Press to scr oll to Clear Password.

4. Press

to display Clea r Password.

5. Press Enter to clear the password.

The Password cleared messagewillbedisplayed.

The password is cleared. The system automatically returns to the default display (WWID).

Disabling password access in HP Command View EVA

Estimated time to complete: 10 minutes

To disable pas

swordaccesstoastoragesysteminHPCommandViewEVA:

NOTE:

YouwillneedtoknowtheWorldWideName(WWN)ofthestoragesystemtodisablepasswordaccess.

1. Start HP Command View EVA in your browser.

2. Click Server O ptions in the Session pane.

The Management Server Options window opens.

3. Click Storage system password access.

The Storage System Password Access window opens.

4. Click Disable.

The Disable Password Access to Storage S ystem window opens.

5. SelectthestoragesystemWorldWideNodeNamefromthedrop-downlist.

NOTE:

Make sure you select the storage system from which you cleared passwords using the

OCP on the controller.

6. Click Disable Pa ssword.

Aconﬁrmation box opens.

7. Click Yes to disable the password.

Step 4. Halting a ll host access to the storage system for an

ofﬂine upgrade (optional)

Estimated time to complete: Varies. Must be performed for each host ac cessing the storage system.

Online upgrade is supported from XCS 6.110, 6.100 and 6.000. Because of the minimal disruption to

system operation, the online procedure is recommended. If the upgrade will be performed ofﬂine, all

host I/O to the storage system must be stopped. Stop all applications accessing the storage system and

shut down hosts, if necessary.

Step 5. Upgrading controller ﬁrm w ar e to XCS 6.200

Estimated time to complete: 25–30 minutes

Upgrading the Enterprise Virtual Array