HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array updating product software guide (XCS 6.200) (5697-7958, February 2009)
CAUTION:
Before upgrading the controller firmware, ensure that the storage system configuration is stable and is
not being changed in any way. If any configurations changes are in progress, monitor them using HP
Command View EVA and wait until they are completed before proceeding with the upgrade.
Upgrading controller firmware
IMPORTANT :
If upgrading from XCS 5.1x0 to 6.200, all source and destination DR groups must be in synchronous
mode before upgrading. Check each DR group to verify this setti ng before proceeding.
To upgrade the controller firmware:
1. Open HP Command View EVA in your browser.
2. In the Navigation pane, select the storage system you want to upgrade.
The pro perties window for the selected storage system opens.
3. Click Code load.
TheCodeLoadStorageSystem-Page1windowopens.
Figure 13
Code Load Storage System-Page 1 window
4. To downloa d XCS 6.2 controller software from the web, go to the following website:
h
ttp://h20293.www2.h p.com.
5. Select Storage and NAS under Product category, and then select HP EVA XCS 6.200 Electronic
Download.
You will receive two .ISO ima ges from which you ca n create CDs.
6. After cr eating a CD of the installation .ISO image, click Browse and select the file containing
version XCS 6.200 of the storage system software from the installation CD:
• EVA8000/8100 – Select either the \HSV210\6200\HSV210_6200.SSS or
\HSV210\LATEST\HSV210_6200.SSS file (the files a re identical).
• EVA4000/4100 or EVA 6000/6100 – Select either the
\HSV200\6200\HSV200_6200.SSS or \HSV200\LATEST\HSV200_6200.SSS file
(the files are identical).
7. Click Next Step.
HP Stora g eWorks 4x00/6x00/8x0 0 Enterprise Virtual Array updating product software guide (XCS 6.200)
47