8x00 Enterprise Virtual Array updating product software guide (XCS 6.200) (5697-7958, February 2009)

Figure 15 Validating code segments complete

Table10Systemsoftwarecodesegmentdescriptions

Segment Description

Before text

Text ﬁle with in formation about the new code and upgrade requirements.

Displayed by HP Command View EVA and not sent to the controller.

Information ﬁle File stored on the controller's ca rd describing contents of t his superﬁle.

OCP image

Firmware for the Operator Controller Panel (LCD entry and display panel) PIC

(8-bit) processor chip.

SDC image

Firmware for System Data Center (Battery, Temperature and Blower manager) PIC

(8-bit) processor chip.

Glue image

Firmware for the GLUE chip FPGA, stored in EEPROM.

CBIC image

Firmware for the CanBus Interface Chip (drive shelf out-of-band c ommunications

chip)PIC(8-bit)processorchip.

Event text ﬁle

File enabling HP Command View EVA to translate binary event data to text. Not

sent to the controller.

EMU image

Firmware for the Drive Shelf Environmental Monitoring Unit (EMU) module. Stored

on the controllers program card a nd contains the image for the CTS I/O module.

Boot image

Initial Firmware that the controller's main processor (PPC) runs after reset or

power-on.

Functional image

EVA ﬁrmware that is upgraded and provides supp ort for all EVA functions.

After text

Text ﬁle with information declaring that up grade has completed and describing

and post-upgrade requirements. Displayed by H P Command View EVA and not

sent to the controller.

HP Stora g eWorks 4x00/6x00/8x0 0 Enterprise Virtual Array updating product software guide (XCS 6.200)