8x00 Enterprise Virtual Array updating product software guide (XCS 6.200) (5697-7958, February 2009)

Figure 24 En

able Password Access to a Storage System window

5. Select the W

orld Wide Node Name of the storage system for which you want to enable password

access.

6. Enter the password in the Password and Conﬁrm password ﬁelds.

NOTE:

Make sure you use the same password you entered on the controller OCP.

7. Click Enable Password.

A message box o pens.

8. Click OK.

HP Command View EVA enables password access to the storage system.

Step 8. Resuming storage system operation

Estimated time to com plete: Varies.

After the storage system software and disk ﬁrmware have been successfully upgraded, the storage s ystem

can be returned to normal operation.

1. Using HP Comma nd View EVA, check the overall status of the storage system

to ensure there are no problems. For instructions on checking the status, see

“Step 1. Checking the health of the Enterprise Virtual Array” on page 42.

2. If you d id on ofﬂine upgrade, per form the following steps:

a. Restart any host servers that were s hutdown for the upgrade.

b. Resume host I/Os.

3. When running HP Continuous Access EVA , enable the failsafe mode on all data replication groups.

See “Preparing an HP Continuous Access EVA environment for upgrading” on page 37.

4. If you changed any host LUN timeout values, reset them to their orig inal values.

HP Stora g eWorks 4x00/6x00/8x0 0 Enterprise Virtual Array updating product software guide (XCS 6.200)