HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array updating product software guide (XCS 6.200) (5697-7958, February 2009)
About this guid e
This guide provides information to help you:
• Upgrade the Enterprise Virtual Array controller firmware and disk drive firmware
• Upgrade supporting components, such as HP Command View EVA and other management
software
This guide does not provide information about upgrading or changing the Enterprise Virtual Array
hardware.
NOTE:
The procedures in this guide are for upgrading from XCS 5.1xx, 6.000, 6.100 or 6.11 0 to XCS 6.200.
IMPORTANT :
To upgrade from an HSV200-A or HSV210-A controller to an HSV200-B or HSV210-B controller, HP
requires that you also upgrade the I/O modules (A and B) to AD623C and AD624C on each shelf. If
you are upgrading to an EVA6100 (HSV200-B) or EVA8100 (HSV210-B) and you do not already have
the 30-10022-01 loop switches installed, you must also upgrade the loop switches to 30-10022-01. See
the HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide for more information.
Intended audience
This guide is intended for use by Enterprise Virtual Array customers involved in upgrading system software
on EVA4x00/6x00/8x00 storage systems. You should have experience with the following:
• Enterprise Virtual Arrays
• Storage area networks
• HP Command View EVA
• HP Command View EVAPerf (used for online upgrades)
Product models
This guid
e includes information for the following Enterprise Virtual Array products:
• EVA4000/6000/8000
• EVA4100/6100/8100
These arr
ays are referenced as EV A4x00/6x00/8x00 throughout the document.
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array updating product software guide (XCS 6.200)
7