HP StorageWorks EVA iSCSI Connectivity Option 9.0 Release Notes (5697-0510, June 2010)

Resolving an IP conflict on an mpx100 if the IP port does not clear the LED
indication on the mpx100
When the mpx100 recognizes an IP conflict with its management ports, its fault LED blinks four times,
once per second, and then off for two seconds. The following error message is displayed:
checkDuplicateIp: Detected Error MAC address
The management port is still enabled and using its IP address.
Workaround
To clear the LED, turn the mpx100 beacon light off using either the mpx Manager or the following
CLI command:
beacon off
Supersedes history
This version supersedes mpx100 firmware version 2.4.4.0.
Effective date
June 2010
EVA iSCSI Connectivity Option 9.0 11