HP StorageWorks EVA iSCSI Connectivity Option 9.0 Release Notes (5697-0510, June 2010)

Where:
• iqn.1986-03.com.hp:fcgw.mpx100 is the standard IQN for all mpx100s.
Workaround
Where:
• When you configure an mpx100 management port, select only the static IP address option.
• blg2–lab is the Symbolic Name.
• 1 is the iSCSI port number.
• 50001fe150002f70.50001fe150002f7f is the presented EVA port.
For details about modifying the Symbolic Name, see the HP StorageWorks EVA iSCSI connectivity
option user guide.
NOTE:
HP recommends adding a Symbolic Name to the iSCSI port IQN target name when presenting the
target to an iSNS server.
Mac iSCSI initiator may lose iSCSI connectivity to LUNs if the Mac server has
Sleep mode enabled
The ATTO iSCSI initiator does not support Mac server Sleep mode. If the Mac goes to sleep because
server Sleep mode is enabled, it may lose the iSCSI connections to its EVA LUNs.
Workaround
If the ATTO iSCSI initiator is installed, disable Mac server Sleep mode.
DHCP-assigned IP address of mpx100's management port may confuse HP
Command View EVA
When an mpx100 management port's IP address is configured using the Dynamic Host Configuration
Protocol (DHCP), HP Command View EVA initially discovers the mpx100. However, HP Command
View EVA does not rediscover the management port IP address of the mpx100 when a new IP address
is assigned by DHCP.
Workaround
When you configure an mpx100 management port, select only the static IP address option.
mpx100 and CHAP security with Linux not supported
The Challenge Handshake Authentication Protocol (CHAP) setup with the Linux iSCSI initiator 3.6.3
is not supported with the mpx100. The Linux iSCSI driver omits CHAP security negotiations at login.
6