HP StorageWorks EVA iSCSI Connectivity User Guide (5697-0511, August 2010)

Description
Message
Number
Log messageID
iSCSI port link speed could not be
determined. Link speed may be
incorrectly programmed.
1334
#%d: QLGetFwStateCallback: Invalid link speed
0x%x
87350
Fibre Channel driver
The informational log messages for the Fibre Channel driver are common to both FC ports 1 (FC1)
and 2 (FC2). The messages are listed and described in Table 23. Log messages beginning with #0
apply to FC port 1 (FC1) and log messages beginning with #1 apply to FC port 2 (FC2).
Table 23 FC driver—informational log messages
DescriptionMessage
Number
Log messageID
Request to reset the FC processor
(adapter) received from IOCTL inter-
face.
98#%d: QLIoctlDisable: Reset adapter118882
Fibre Channel LIP (loop initialization
procedure) occurred. LIP type is re-
ported, as are the contents of the FC
processor mailbox 1 register.
304
#%d: QLIsrEventHandler: LIP occurred (%x):
mailbox1 = %x
119088
Fibre Channel LIP Reset occurred.
LIP reset type is reported, as are the
contents of the FC processor mail-
box 1 register.
305
#%d: QLIsrEventHandler: LIP reset occurred
(%x): mailbox1 = %x
119089
Fibre Channel Link Up occurred.
Event status is reported, as are the
contents of the FC processor mail-
box 1 register.
306
#%d: QLIsrEventHandler: Link up (%x) mail-
box1 = %x
119090
Event reporting that the Fibre Chan-
nel link is up, and the mode it is
operating in (point-to-point or loop).
Event status is reported, as is the
RunTimeMode, which indicates the
mode (0 = loop, 1 = point-to-point).
308
#%d: QLIsrEventHandler: Link mode up (%x):
RunTimeMode=%x
119092
Event reporting that an RSCN was
received. Event status is reported,
as is the RSCN information.
309
#%d: QLIsrEventHandler: RSCN update (%x)
rscnInfo: %x
119093
Event reporting an FC port update.
Event status is reported, as are the
contents of FC processor mailbox 1,
2, and 3 registers.
313
#%d: QLIsrEventHandler: Port update (%x)
mb1-3 %x %x %x
119097
Error log messages
The following sections list and describe, by reporting module, the error log messages.
EVA iSCSI Connectivity User Guide 181