HP StorageWorks EVA iSCSI Connectivity User Guide (5697-0511, August 2010)

2. FTP to the mpx100/100b management port and log in with the following information:
Username: ftp
Password: ftp
3. To set FTP for binary transfer, enter the following information:
ftp> bin
ftp> put mpx100-x_x_x_x.bin
ftp> quit
4. Use Telnet to connect to the mpx100/100b and log in as guest.
Username: guest
Password: password
5. Set administrative privileges to allow for the firmware upgrade with the following information:
mpx100> admin start
password: config
6. Upgrade the mpx100/100b using the image command.
mpx100 admin> image unpack mpx100-x_x_x_x.bin
7. Reboot the mpx100/100b for new firmware to take effect.
mpx100 admin> reboot.
EVA iSCSI Connectivity User Guide 67