8100 Updating Product Software Guide (XCS 6.250) (5697-1716, February 2012)

g. Click Yes to confirm the name change.

4. To detect switches, select Switch Settings and IP Address, and enter the following information:

a. The IP Address of the primary switch for the SAN for which you want a report. Information

will be collected for all devices connected to this switch.

b. To discover and perform data collection for a single switch, clear Discover connected

switches. (If this check box is selected, SAN Visibility discovers and performs data

collection for all connected switches.)

c. Enter the switch login and password, if prompted, and enter the read community value

to discover the switch. (The default value is Public.)

d. If you have created more than one fabric, use the Select Component Group drop-down

list to select the fabric to which you want to add this switch.

e. Click Discover Switch to confirm the availability and accessibility of the switch.

f. Click Add to add the switch to the reporting configuration. The extended switch information

with IP addresses appears in the right panel.

Checking and upgrading your SAN infrastructure 15