8100 Updating Product Software Guide (XCS 6.250) (5697-1716, February 2012)

1. Open HP P6000 Command View and click the icon of the storage system you want to upgrade.

a. If there are any caution or warning conditions, click the Hardware folder to expand the

navigation tree.

The Hardware Folder Properties window (Figure 9 (page 40)) opens. The Operational

State box for the LED display and EMU indicates if there is a hardware problem.

Figure 9 Hardware Folder Properties window

b. Select the array and click Refresh to update the cache.

c. If a problem is indicated, expand the navigation tree under the Hardware folder until

you see a hardware component icon with an attention or warning icon on it.

d. Click the component icon to display the Disk Enclosure Properties window (Figure 10 (page

40)). The Operational state box indicates if there is a hardware error. If the operational

state is good, proceed with the upgrade.

Figure 10 Checking operational states

e. If you cannot resolve the error, contact your HP-authorized service representative for

assistance.

40 Upgrading the Enterprise Virtual Array