8100 Updating Product Software Guide (XCS 6.250) (5697-1716, February 2012)

Figure 16 Storage system updating firmware

13. A final Confirm System Code Load window opens.

Enter YES (all uppercase) and click Code Load System to continue. In the Initialized Storage

System Properties window, verify the version of the storage system software in the Version

box. It should be 6250.

IMPORTANT: During a typical update, the command view interface may become responsive

before all EMU updates are done. If this occurs, the attention icon appears and disk drives

in the enclosures will show as unmappable hardware. This state is typically resolved within

about 10 minutes of EMU completion. Just wait until the state is resolved.

48 Upgrading the Enterprise Virtual Array