reference manual version 3.0 mib www.hp.
Notice Safety notices © Hewlett-Packard Company, 2001. All rights reserved. Any servicing, adjustment, maintenance, or repair must be performed only by authorized service-trained personnel. Edition: E1201 Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Contents Preface Chapter 1 About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Getting Software Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi MIB-II Object Types Overview . . . . . . . . . . . . . . . .
Chapter 2 iv The EGP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-57 EGP Neighbor Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-58 Additional EGP Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-64 The Transmission Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-65 The SNMP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 3 Chapter 4 2-88 FCFabric Element MIB Object Types Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 FE-MIB File System Organization . . . . . . . . . . . . . . . . . . . . 3-2 Definitions for FE-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 The Configuration Group . . . . . . . . . . . . . .
vi FLASH Administration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Environment Sensor Table . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 The Fabric Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 Immediate Neighborhood ISL Family Table . . . . . . . . . . . . 4-24 The SW Agent Configuration Group . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 SNMP Agent Community String Table . . . . . . . . . . . . . . . .
Appendix A MIB Functional Groupings Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Switch Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Sensor Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Port Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Event Variables . . . . . . . . . .
viii MIB Reference Manual Version 3.
Preface About This Guide This guide provides the following information about Management Information Bases (MIBs): Chapter 1 MIB-II Object Types Provides information about MIB-II object types. Chapter 2 Fibre Alliance MIB Object Types Provides information about FA-MIB object types. Chapter 3 FCFabric Element MIB Object Types Provides information about FE-MIB object types. Chapter 4 Provides information about FCSwitch MIB object types.
Provided on the FC Entry Switch 8B and FC Switch 8B Documentation CD, and at the HP Web site at http://www.hp.com/support/fc8B: • • • • • • • • • • • • • • HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Getting Started Guide (A7346-90902) HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Installation and Reference Guide Fabric OS Reference Manual, version 3.0 Fabric OS Procedures Guide, version 3.0 Fabric OS Version 3.0.
Getting Help For information for the FC Entry Switch 8B and FC Switch 8B, visit the HP Web site at http://www.hp.com/support/fc8B. For the most current technical support information for the FC 16B, visit the HP Web site at http://www.hp.com/support/fc16B. This includes hardware and software support, all repairs, and spare components.
xii MIB Reference Manual Version 3.
Chapter MIB-II Object Types 1 This chapter provides descriptions and other information specific to MIB-II object types, including the following information: • • • • • • • • • • • • • • Overview on page 1-2 Definitions for MIB-II on page 1-6 The System Group on page 1-7 The Interfaces Group on page 1-10 The Address Translation Group on page 1-20 The IP Group on page 1-23 IP Address Table on page 1-28 IP Routing Table on page 1-30 The ICMP Group on page 1-40 The TCP Group on page 1-46 The UDP Group on pa
1 MIB-II Object Types Overview The object types in MIB-II are organized into the following groupings: • • • • • • • • • • The System Group The Interfaces Group The Address Translation Group The IP Group The ICMP Group The TCP Group The UDP Group The EGP Group The Transmission Group The SNMP Group MIB-II File System Organization The following graphics depict the organization and structure of the MIB-II file system. Figure 1-1 1-2 MIB-II Overall Tree Structure MIB Reference Manual Version 3.
MIB-II Object Types Figure 1-2 MIB Reference Manual Version 3.0 1 Tree Structure for MIB-II System, Interfaces, AT, and IP groups.
1 MIB-II Object Types Figure 1-3 1-4 Tree Structure for MIB-II ICMP, TCP, UDP, and EGP groups. MIB Reference Manual Version 3.
MIB-II Object Types Figure 1-4 MIB Reference Manual Version 3.0 1 Tree Structure for MIB-II SNMP group.
1 MIB-II Object Types Definitions for MIB-II The following definitions are used for MIB-II.
MIB-II Object Types 1 The System Group Implementation of the System group is mandatory for all systems. If an agent is not configured to have a value for any of the System Group variables, a string of length 0 is returned. sysDescr Syntax Display String of size 0 to 255 Access Read-only Status Mandatory Description A textual description of the entity.
1 MIB-II Object Types sysUpTime Syntax TimeTicks Access Read-only Status Mandatory Description The time (in hundredths of a second) since the network management portion of the system was last re-initialized. sysContact Syntax Display String of size 0 to 255 Access Read-write Status Mandatory Description The textual identification of the contact person for this managed node, together with information on how to contact this person. Note: Default value = Field Support.
MIB-II Object Types 1 sysServices Syntax Integer of size 0 to 127 Access Read-only Status Mandatory Description A value that indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero. Then, for each layer, L, in the range 1 through 7, for which this node performs transactions, 2 raised to (L - 1) is added to the sum. For example, a node that primarily performs routing functions has a value of 4 (23-1).
1 MIB-II Object Types The Interfaces Group Implementation of the Interfaces group is mandatory for all systems. ifNumber Syntax Integer Access Read-only Status Mandatory Description The number of network interfaces (regardless of their current state) present on this system. Note: When running FCIP, the return value is always 3. If not running FCIP, the value is 2. Interfaces Table The Interfaces table contains information on the entity's interfaces.
MIB-II Object Types Table 1-2 IfEntry Objects and Object Types ifIndex: 1-12 Integer fDescr: 1-12 Display String ifType: 1-13 Integer ifMtu: 1-14 Integer ifSpeed: 1-14 Gauge ifPhysAddress: 1-15 PhysAddress ifAdminStatus: 1-15 Integer ifOperStatus: 1-16 Integer ifLastChange: 1-16 TimeTicks ifInOctets: 1-16 Counter ifInUcastPkts: 1-16 Counter ifInNUcastPkts: 1-17 Counter ifInDiscards: 1-17 Counter ifInErrors: 1-17 Counter ifInUnknownProtos: 1-17 Counter ifOutOctets: 1-18 Coun
1 MIB-II Object Types ifIndex [ifTable] Syntax Integer Access Read-only Status Mandatory Description A unique value for each interface. Note: The values range between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
MIB-II Object Types 1 ifType [ifTable] Syntax Value Declaration Description Integer 1 (other) none of the following 2 (regular1822) 3 (hdh1822) 4 (ddn-x25) 5 (rfc877-x25) 6 (ethernet-csmacd) 7 (iso88023-csmacd) 8 (iso88024-tokenBus) 9 (iso88025-tokenRing) 10 (iso88026-man) 11 (starLan) 12 (proteon-10Mbit) 13 (proteon-80Mbit) 14 (hyperchannel) 15 (fddi) 16 (lapb) 17 (sdlc) 18 (ds1) T-1 19 (e1) european equivalent of T-1 20 (basicISDN) 21 (primaryISDN) proprietary serial 22 (propPointToPointSeri
1 MIB-II Object Types Access Read-only Status Mandatory Description The type of interface, designated by the physical/link protocol(s) immediately below the network layer in the protocol stack. Note: fei0 maps to 6 (ethernet-csmacd). lo0 maps to 24 (softwareLoopback). fc0 maps to 56. ifMtu [ifTable] Syntax Integer Access Read-only Status Mandatory Description The size (in octets) of the largest datagram that can be sent/received on the interface.
MIB-II Object Types 1 ifPhysAddress [ifTable] Syntax PhysAddress Access Read-only Status Mandatory Description The interface's address at the protocol layer immediately below the network layer in the protocol stack. Note: For interfaces that do not have such an address (for example, a serial line), this object should contain an octet string of zero length. fei0 returns MAC address of the Ethernet. lo0 returns null. fc0 returns MAC address of the Ethernet.
1 MIB-II Object Types ifOperStatus [ifTable] Syntax Value Declaration Description Integer 1 (up) Ready to pass packets. 2 (down) Not ready to pass packets. 3 (testing) In some test mode. Access Read-only Status Mandatory Description The current operational state of the interface. Note: The 3 (testing) state indicates that no operational packets can be passed.
MIB-II Object Types 1 ifInNUcastPkts [ifTable] Syntax Counter Access Read-only Status Mandatory Description The number of non-unicast packets (for example, subnetwork- broadcast or subnetwork-multicast) delivered to a higher-layer protocol. ifInDiscards [ifTable] Syntax Counter Access Read-only Status Mandatory Description The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol.
1 MIB-II Object Types ifOutOctets [ifTable] Syntax Counter Access Read-only Status Mandatory Description The total number of octets transmitted out of the interface, including framing characters. ifOutUcastPkts [ifTable] Syntax Counter Access Read-only Status Mandatory Description The total number of packets that were requested, by higher-level protocols, to be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
MIB-II Object Types 1 ifOutErrors [ifTable] Syntax Counter Access Read-only Status Mandatory Description The number of outbound packets that could not be transmitted because of errors. ifOutQLen [ifTable] Syntax Gauge Access Read-only Status Mandatory Description The length of the output packet queue (in packets).
1 MIB-II Object Types The Address Translation Group Implementation of the Address Translation group is mandatory for all systems. Note however that this group is deprecated by MIB-II. That is, it is being included solely for compatibility with MIB-I nodes, and will most likely be excluded from MIB-III nodes. From MIB-II and onwards, each network protocol group contains its own address translation tables.
MIB-II Object Types 1 atEntry Syntax At Entry Access Not accessible Status Description Index Deprecated Each entry contains one NetworkAddress to physical address equivalence. atIfIndex, atNetAddress Table 1-3 AtEntry Objects and Object Types atIfIndex: 1-21 Integer atPhysAddress: 1-21 PhysAddress atNetAddress: 1-22 NetworkAddress atIfIndex Syntax Integer Access Read-write Status Deprecated Description The interface on which this entry's equivalence is effective.
1 MIB-II Object Types atNetAddress Syntax NetworkAddress Access Read-write Status Deprecated Description 1-22 The NetworkAddress (for example, the IP address) corresponding to the media-dependent physical address. MIB Reference Manual Version 3.
MIB-II Object Types 1 The IP Group Implementation of the IP group is mandatory for all systems. ipForwarding Syntax Value Declaration Description Integer 1 (forwarding) Acting as a gateway. 2 (Not forwarding) Not acting as a gateway. Access Read-write Status Mandatory Description The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams.
1 MIB-II Object Types ipInHdrErrors Syntax Counter Access Read-only Status Mandatory Description The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, and so on.
MIB-II Object Types 1 ipInDiscards Syntax Counter Access Read-only Status Mandatory Description The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack of buffer space). Note: This counter does not include any datagrams discarded while awaiting re-assembly.
1 MIB-II Object Types ipOutNoRoutes Syntax Counter Access Read-only Status Mandatory Description The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note: This counter includes any packets counted in ipForwDatagrams which meet this “no-route” criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
MIB-II Object Types 1 ipReasmFails Syntax Counter Access Read-only Status Mandatory Description The number of failures detected by the IP re-assembly algorithm (for whatever reason, timed out, errors, and so on). Note: This is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
1 MIB-II Object Types IP Address Table The IP address table contains this entity's IP addressing information. ipAddrTable Syntax Sequence of IpAddrEntry Access Not accessible Status Description Mandatory The table of addressing information relevant to this entity's IP addresses. ipAddrEntry Syntax IpAddrEntry Access Not accessible Status Description Index Mandatory The addressing information for one of this entity's IP addresses.
MIB-II Object Types 1 ipAdEntIfIndex Syntax Integer Access Read-only Status Mandatory Description The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. ipAdEntNetMask Syntax IpAddress Access Read-only Status Mandatory Description The subnet mask associated with the IP address of this entry.
1 MIB-II Object Types IP Routing Table The IP routing table contains an entry for each route presently known to this entity. ipRouteTable Syntax Sequence of IpRouteEntry Access Not accessible Status Description Mandatory This entity's IP Routing table. ipRouteEntry Syntax IpRouteEntry Access Not accessible Status Description Index 1-30 Mandatory A route to a particular destination. ipRouteDest MIB Reference Manual Version 3.
MIB-II Object Types Table 1-5 1 IpRouteEntry Objects and Object Types ipRouteDest: 1-31 IpAddress ipRouteIfIndex: 1-31 Integer ipRouteMetric1: 1-32 Integer ipRouteMetric2: 1-33 Integer ipRouteMetric3: 1-33 Integer ipRouteMetric4: 1-33 Integer ipRouteNextHop: 1-33 IpAddress ipRouteType: 1-34 Integer ipRouteProto: 1-35 Integer ipRouteAge: 1-35 Integer ipRouteMask: 1-36 IpAddress ipRouteMetric5: 1-36 Integer ipRouteInfo: 1-36 Object Identifier ipRouteDest Syntax IpAddress Access
1 MIB-II Object Types ipRouteMetric1 Syntax Integer Access Read-write Status Mandatory Description The primary routing metric for this route. Note: 1-32 The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. MIB Reference Manual Version 3.
MIB-II Object Types 1 ipRouteMetric2 Syntax Integer Access Read-write Status Mandatory Description An alternate routing metric for this route. Note: The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. ipRouteMetric3 Syntax Integer Access Read-write Status Mandatory Description An alternate routing metric for this route.
1 MIB-II Object Types ipRouteType Syntax Value Declaration Description Integer 1 (other) None of the following 2 (invalid) An invalidated route-- route to directly 3 (direct) Connected (sub-)network-- route to a non-local 4 (indirect) Host/network/sub-network Access Read-write Status Mandatory Description The type of route. Note: The values direct (3) and indirect (4) refer to the notion of direct and indirect routing in the IP architecture.
MIB-II Object Types 1 ipRouteProto Syntax Value Declaration Description Integer 1 (other) None of the following non-protocol information, for example, manually configured. 2 (local) 2 = localEntries set via a network. 3 (netmgmt) 3 = netmgmtManagement protocol obtained using ICMP. 4 (icmp) 4 = icmpFor example, Redirect the remaining values are all gateway routing protocols.
1 MIB-II Object Types ipRouteMask Syntax IpAddress Access Read-write Status Mandatory Description The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of the following: mask network 255.0.0.
MIB-II Object Types 1 IP Address Translation Table The IP address translation table contains the IpAddress to physical address equivalences. Some interfaces do not use translation tables for determining address equivalences (for example, DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, and therefore has zero entries.
1 MIB-II Object Types ipNetToMediaPhysAddress Syntax PhysAddress Access Read-write Status Mandatory Description The media-dependent physical address. ipNetToMediaNetAddress Syntax IpAddress Access Read-write Status Mandatory Description The IpAddress corresponding to the media-dependent physical address.
MIB-II Object Types 1 Additional IP Objects ipRoutingDiscards Syntax Counter Access Read-only Status Mandatory Description The number of routing entries that were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries. MIB Reference Manual Version 3.
1 MIB-II Object Types The ICMP Group Implementation of the ICMP group is mandatory for all systems. icmpInMsgs Syntax Counter Access Read-only Status Mandatory Description The total number of ICMP messages which the entity received. Note: This counter includes all ICMP messages counted by icmpInErrors.
MIB-II Object Types 1 icmpInParmProbs Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Parameter Problem messages received. icmpInSrcQuenchs Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Source Quench messages received. icmpInRedirects Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Redirect messages received.
1 MIB-II Object Types icmpInTimestamps Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Timestamp (request) messages received. icmpInTimestampReps Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Timestamp Reply messages received. icmpInAddrMasks Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Address Mask Request messages received.
MIB-II Object Types 1 icmpOutMsgs Syntax Counter Access Read-only Status Mandatory Description The total number of ICMP messages that this entity attempted to send. Note: This counter includes all those counted by icmpOutErrors. icmpOutErrors Syntax Counter Access Read-only Status Mandatory Description The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.
1 MIB-II Object Types icmpOutParmProbs Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Parameter Problem messages sent. icmpOutSrcQuenchs Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Source Quench messages sent. icmpOutRedirects Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
MIB-II Object Types 1 icmpOutTimestamps Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Timestamp (request) messages sent. icmpOutTimestampReps Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Timestamp Reply messages sent. icmpOutAddrMasks Syntax Counter Access Read-only Status Mandatory Description The number of ICMP Address Mask Request messages sent.
1 MIB-II Object Types The TCP Group Implementation of the TCP group is mandatory for all systems that implement the TCP. Note: Instances of object types that represent information about a particular TCP connection are transient; they persist only as long as the connection in question.
MIB-II Object Types 1 tcpRtoMax Syntax Integer Access Read-only Status Mandatory Description The maximum value permitted by a TCP implementation for the retransmission time-out, measured in milliseconds. Note: More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission time-out. In particular, when the time-out algorithm is rsre (3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
1 MIB-II Object Types tcpAttemptFails Syntax Counter Access Read-only Status Mandatory Description The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
MIB-II Object Types 1 tcpOutSegs Syntax Counter Access Read-only Status Mandatory Description The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. tcpRetransSegs Syntax Counter Access Read-only Status Mandatory Description The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
1 MIB-II Object Types tcpConnEntry Syntax TcpConnEntry Access Not accessible Status Description Index Mandatory Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
MIB-II Object Types 1 tcpConnState Syntax Value Declaration Integer 1 (closed) Description 2 (listen) 3 (synSent) 4 (synReceived) 5 (established) 6 (finWait1) 7 (finWait2) 8 (closeWait) 9 (lastAck) 10 (closing) 11 (timeWait) 12 (deleteTCB) Access Read-write Status Mandatory Description The state of this TCP connection. Note: The only value which may be set by a management station is deleteTCB(12).
1 MIB-II Object Types tcpConnLocalPort Syntax Integer of size 0 to 65535 Access Read-only Status Mandatory Description The local port number for this TCP connection. tcpConnRemAddress Syntax IpAddress Access Read-only Status Mandatory Description The remote IP address for this TCP connection. tcpConnRemPort Syntax Integer of size 0 to 65535 Access Read-only Status Mandatory Description The remote port number for this TCP connection.
MIB-II Object Types 1 tcpOutRsts Syntax Counter Access Read-only Status Mandatory Description The number of TCP segments sent containing the RST flag. MIB Reference Manual Version 3.
1 MIB-II Object Types The UDP Group Implementation of the UDP group is mandatory for all systems which implement the UDP. udpInDatagrams Syntax Counter Access Read-only Status Mandatory Description The total number of UDP datagrams delivered to UDP users. udpNoPorts Syntax Counter Access Read-only Status Mandatory Description The total number of received UDP datagrams for which there was no application at the destination port.
MIB-II Object Types 1 UDP Listener Table The UDP listener table contains information about this entity's UDP end-points on which a local application is currently accepting datagrams. udpTable Syntax Sequence of UdpEntry Access Not accessible Status Description Mandatory A table containing UDP listener information. udpEntry Syntax UdpEntry Access Not accessible Status Description Index Mandatory Information about a particular current UDP listener.
1 MIB-II Object Types udpLocalPort Syntax Integer of size 0 to 65535 Access Read-only Status Mandatory Description 1-56 The local port number for this UDP listener. MIB Reference Manual Version 3.
MIB-II Object Types 1 The EGP Group Implementation of the EGP group is mandatory for all systems which implement the EGP. egpInMsgs Syntax Counter Access Read-only Status Mandatory Description The number of EGP messages received without error. egpInErrors Syntax Counter Access Read-only Status Mandatory Description The number of EGP messages received that proved to be in error.
1 MIB-II Object Types EGP Neighbor Table The EGP neighbor table contains information about this entity's EGP neighbors. egpNeighTable Syntax Sequence of EgpNeighEntry Access Not accessible Status Description Mandatory The EGP neighbor table. egpNeighEntry Syntax EgpNeighEntry Access Not accessible Status Description Index 1-58 Mandatory Information about this entity's relationship with a particular EGP neighbor. egpNeighAddr MIB Reference Manual Version 3.
MIB-II Object Types Table 1-9 1 EgpNeighEntry Object and Object Types egpNeighState: 1-59 Integer egpNeighAddr: 1-60 IpAddress egpNeighAs: 1-60 Integer egpNeighInMsgs: 1-61 Counter egpNeighInErrs: 1-61 Counter egpNeighOutMsgs: 1-61 Counter egpNeighOutErrs: 1-61 Counter egpNeighInErrMsgs: 1-62 Counter egpNeighOutErrMsgs: 1-62 Counter egpNeighStateUps: 1-62 Counter egpNeighStateDowns: 1-62 Counter egpNeighIntervalHello: 1-63 Integer egpNeighIntervalPoll: 1-63 Integer egpNeighMode
1 MIB-II Object Types egpNeighAddr Syntax IpAddress Access Read-only Status Mandatory Description The IP address of this entry's EGP neighbor. egpNeighAs Syntax Integer Access Read-only Status Mandatory Description 1-60 The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known. MIB Reference Manual Version 3.
MIB-II Object Types 1 egpNeighInMsgs Syntax Counter Access Read-only Status Mandatory Description The number of EGP messages received without error from this EGP peer. egpNeighInErrs Syntax Counter Access Read-only Status Mandatory Description The number of EGP messages received from this EGP peer that proved to be in error (for example, bad EGP checksum).
1 MIB-II Object Types egpNeighInErrMsgs Syntax Counter Access Read-only Status Mandatory Description The number of EGP-defined error messages received from this EGP peer. egpNeighOutErrMsgs Syntax Counter Access Read-only Status Mandatory Description The number of EGP-defined error messages sent to this EGP peer. egpNeighStateUps Syntax Counter Access Read-only Status Mandatory Description The number of EGP state transitions to the UP state with this EGP peer.
MIB-II Object Types 1 egpNeighIntervalHello Syntax Integer Access Read-only Status Mandatory Description The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904. egpNeighIntervalPoll Syntax Integer Access Read-only Status Mandatory Description The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
1 MIB-II Object Types egpNeighEventTrigger Syntax Value Declaration Integer 1 (start) Description 2 (stop) Access Read-write Status Mandatory Description A control variable used to trigger operator-initiated Start and Stop events. Note: When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of stop.
MIB-II Object Types 1 The Transmission Group Based on the transmission media underlying each interface on a system, the corresponding portion of the Transmission group is mandatory for that system. When Internet-standard definitions for managing transmission media are defined, the transmission group is used to provide a prefix for the names of those objects.
1 MIB-II Object Types The SNMP Group Implementation of the SNMP group is mandatory for all systems which support an SNMP protocol entity. Some of the objects defined below will be zero-valued in those SNMP implementations that are optimized to support only those functions specific to either a management agent or a management station.
MIB-II Object Types 1 snmpInBadCommunityNames Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. snmpInBadCommunityUses Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
1 MIB-II Object Types snmpInNoSuchNames Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is “noSuchName”. snmpInBadValues Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is “badValue”.
MIB-II Object Types 1 snmpInTotalReqVars Syntax Counter Access Read-only Status Mandatory Description The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
1 MIB-II Object Types snmpInSetRequests Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. snmpInGetResponses Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
MIB-II Object Types 1 snmpOutNoSuchNames Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is noSuchName. snmpOutBadValues Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is badValue.
1 MIB-II Object Types snmpOutGetNexts Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. snmpOutSetRequests Syntax Counter Access Read-only Status Mandatory Description The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
MIB-II Object Types 1 snmpEnableAuthenTraps Syntax Value Declaration Integer 1 (enabled) Description 2 (disabled) Access Read-write Status Mandatory Description Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled.
1 1-74 MIB-II Object Types MIB Reference Manual Version 3.
Chapter Fibre Alliance MIB Object Types 2 This chapter contains descriptions and other information that is specific to Fibre Alliance MIB (FA-MIB) object types, including the following: • • • • • • • Overview on page 2-2 Definitions for FCMGMT on page 2-6 The Connectivity Group on page 2-7 The SNMP Trap Registration Group on page 2-82 The Revision Number on page 2-86 The Statistics Group on page 2-87 Related Traps on page 2-88 MIB Reference Manual Version 3.
2 Fibre Alliance MIB Object Types Overview The object types in FCMGMT-MIB are organized into the following groupings: • • • • • Connectivity Trap Registration Revision Number Statistic Set Service Set FCMGMT-MIB File System Organization The following graphics depict the organization and structure of FA-MIB: See Figure 2-2 on page 2-3 See Figure 2-3 on page 2-4 See Figure 2-3 on page 2-4 See Figure 2-3 on page 2-4 See Figure 2-4 on page 2-5 Figure 2-1 2-2 FA-MIB Overall Tree Structure MIB Referen
Fibre Alliance MIB Object Types Figure 2-2 MIB Reference Manual Version 3.
2 Fibre Alliance MIB Object Types Figure 2-3 2-4 Tree Structure for connUnitLink, trapReg, and connUnitPortStat Tables MIB Reference Manual Version 3.
Fibre Alliance MIB Object Types Figure 2-4 MIB Reference Manual Version 3.
2 Fibre Alliance MIB Object Types Definitions for FCMGMT The following definitions are used for FCMGMT. Table 2-1 FCMGMT Definitions Type Definition Value FcNameId Octet String of size 8 FcGlobalId Octet String of size 16 FcEventSeverity Integer FcUnitType 2-6 Integer Declaration Description 1 (unknown) 2 (emergency) Emergency status. 3 (alert) Alert status. 4 (critical) Critical status. 5 (error) Error status. 6 (warning) Warning status.
Fibre Alliance MIB Object Types 2 The Connectivity Group Implementation of the Connectivity group is mandatory for all systems. uNumber Syntax Integer Access Read-only Status Mandatory Description The number of connectivity units present on this system (represented by this agent). May be a count of the boards in a chassis or the number of full boxes in a rack. Note: The connectivity unit is mapped to a switch. uNumber is always set to 1.
2 Fibre Alliance MIB Object Types statusChangeTime Syntax TimeTicks Access Read-only Status Deprecated Description The sysuptime timestamp (in centiseconds) at which the last status change occurred for any members of the set. In other words, this is the latest timestamp that connUnitStatus or connUnitPortStatus changed.
Fibre Alliance MIB Object Types 2 Connectivity Unit Table connUnitTable Syntax Sequence of connUnitEntry Access Not accessible Status Description Mandatory A list of units under a single SNMP agent. The number of entries is given by the value of uNumber. The value is 1 for stand-alone system.
2 Fibre Alliance MIB Object Types Table 2-2 2-10 connUnitEntry Objects and Object Types (Continued) connUnitStatusChangeTime: 2-17 TimeTicks connUnitConfigurationChangeTime: 2-18 TimeTicks connUnitNumRevs: 2-18 Integer connUnitNumZones: 2-18 Integer connUnitModuleId: 2-19 Octet String connUnitName: 2-19 Display String connUnitInfo: 2-19 Display String connUnitControl: 2-20 Integer connUnitContact: 2-21 Display String connUnitLocation: 2-21 Display String, connUnitEventFilter: 2-21
Fibre Alliance MIB Object Types 2 connUnitId [connUnitTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description The unique identification for this connectivity unit among those within this proxy domain. The value MUST be unique within the proxy domain because it is the index variable for connUnitTable. The value assigned to a given connectivity unit SHOULD be persistent across agent and unit resets.
2 Fibre Alliance MIB Object Types • It SHOULD be one of these FC-PH/PH3 formats: • IEEE (NAA=1) • IEEE Extended (NAA=2) • IEEE Registered (NAA=5). • IEEE Registered extended (NAA=6). Use of the IEEE formats allows any IEEE-registered vendor to assure global uniqueness independently. The following are some references on IEEE WWN formats: http://standards.ieee.org/regauth/oui/tutorials/fibreformat.html http://standards.ieee.org/regauth/oui/tutorials/fibrecomp_id.
Fibre Alliance MIB Object Types 2 connUnitNumports [connUnitTable] Syntax Integer Access Read-only Status Mandatory Description Number of physical ports in the connectivity unit (internal/embedded, external). FC Entry Switch 8B and FC Switch 8B: 8 FC 16B: 16.
2 Fibre Alliance MIB Object Types connUnitStatus [connUnitTable] Syntax Table 2-4 Value Declaration Integer 1 (unknown) Description 2 (unused) 3 (ok) 4 (warning) Needs attention 5 (failed) Access Read-only Status Mandatory Description Overall status of the connectivity unit.
Fibre Alliance MIB Object Types 2 connUnitSn [connUnitTable] Syntax Display String of size 0 to 79 Access Read-only Status Mandatory Description The serial number for this connectivity unit. Note: Set to the SSN (which by default is the WWN), but is changeable through telnet. connUnitUpTime [connUnitTable] Syntax TimeTicks Access Read-only Status Mandatory Description The number of centiseconds since the last unit initialization. Note: Set when connUnitTable is initialized.
2 Fibre Alliance MIB Object Types connUnitDomainId [connUnitTable] Syntax Octet String of size 3 Access Read-only Status Mandatory Description 24 bit Fibre Channel address ID of this connectivity unit, right justified with leading zeros if required. If this value is not applicable, return all bits set to one. Note: Set to the switch domain ID (as per FC-SW).
Fibre Alliance MIB Object Types 2 connUnitPrincipal [connUnitTable] Syntax Integer Table 2-6 Value Declaration Integer 1 (unknown) Description 2 (no) 3 (yes) Access Read-only Status Mandatory Description Whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, return unknown. Note: If the switch is principal, this is set to 3 (yes), otherwise, it is set to 2 (no).
2 Fibre Alliance MIB Object Types connUnitConfigurationChangeTime [connUnitTable] Syntax TimeTicks Access Read-only Status Deprecated Description The sysuptime timestamp (in centiseconds) at which the last configuration change occurred for any members of the set. In other words, this is the latest timestamp of flash memory update.This represents a union of change information for connUnitConfigurationChangeTime Note: This is the same as configurationChangeTime.
Fibre Alliance MIB Object Types 2 connUnitModuleId [connUnitTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description This is a unique id, persistent between boots, that can be used to group a set of connUnits together into a module. The intended use would be to create a connUnit with a connUnitType of “module” to represent a physical or logical group of connectivity units. Then the value of the group would be set to the value of connUnitId for this “container” connUnit.
2 Fibre Alliance MIB Object Types connUnitControl [connUnitTable] Syntax Table 2-7 Value Declaration Integer 1 (unknown) Description 2 (invalid) Access Read-write Status Mandatory Description 3 (resetConnUnitColdStart) Reboot; the addressed unit performs a Cold Start reset. 4 (resetConnUnitWarmStart) Fastboot; the addressed unit performs a Warm Start reset. 5 (offlineConnUnit) Disable switch; the addressed unit puts itself into an implementation dependant offline state.
Fibre Alliance MIB Object Types 2 connUnitContact [connUnitTable] Syntax Display String of size 0 to 79 Access Read-write Status Mandatory Description Contact information for this connectivity unit. Note: Set to sysContact. connUnitLocation [connUnitTable] Syntax Display String of size 0 to 79 Access Read-write Status Mandatory Description Location information for this connectivity unit. Note: Set to sysLocation.
2 Fibre Alliance MIB Object Types connUnitMaxEvents [connUnitTable] Syntax Integer Access Read-only Status Mandatory Description Max number of events that can be defined in connUnitEventTable. Note: Max buffer is 2147483647 {231-1). connUnitEventCurrID [connUnitTable] Syntax Integer Access Read-only Status Mandatory Description The last used event ID (connUnitEventId). Note: Same as connUnitNumEvents.
Fibre Alliance MIB Object Types 2 connUnitRevsEntry [ConnUnitRevsTable] Syntax ConnUnitRevsEntry Access Not accessible Status Description Index Mandatory Table of the revisions supported by connectivity units managed by this agent.
2 Fibre Alliance MIB Object Types connUnitRevsRevId [ConnUnitRevsTable] Syntax Display String Access Read-only Status Mandatory Description A vendor-specific string identifying a revision of a component of the connUnit indexed by connUnitRevsUnitId. Note: Index 1 returns the switchType from telnet command switchShow. Index 2 returns the Fabric OS version from the telnet command version, for example, v2.2.
Fibre Alliance MIB Object Types 2 connUnitSensorEntry [connUnitSensorTable] Syntax ConnUnitSensorEntry Access Not accessible Status Description Index Mandatory Each entry contains the information for a specific sensor.
2 Fibre Alliance MIB Object Types connUnitSensorIndex [connUnitSensorTable] Syntax Integer of size 1 to 2147483647 Access Read-only Status Mandatory Description A unique value among all connUnitSensorEntrys with the same value of connUnitSensorUnitId, in the range between 1 and connUnitNumSensor.
Fibre Alliance MIB Object Types 2 connUnitSensorInfo [connUnitSensorTable] Syntax Display String Access Read-only Status Mandatory Description Miscellaneous static info about the sensor such as its serial number. Note: Each contains textual information about the sensor name. Returns the serial ID if this is for the power supply. Otherwise, it returns Null.
2 Fibre Alliance MIB Object Types connUnitSensorType [connUnitSensorTable] Syntax Table 2-11 Value Declaration Integer 1 (unknown) Description 2 (other) 3 (battery) 4 (fan) 5 (power-supply) 6 (transmitter) 7 (enclosure) 8 (board) 9 (receiver) Access Read-only Status Mandatory Description The type of component being monitored by this sensor.
Fibre Alliance MIB Object Types 2 connUnitSensorCharacteristic [connUnitSensorTable] Syntax Table 2-12 Value Declaration Integer 1 (unknown) Description 2 (other) 3 (temperature) 4 (pressure) 5 (emf) Current is a keyword 6 (currentValue) 7 (airflow) 8 (frequency) 9 (power) Access Read-only Status Mandatory Description The characteristics being monitored by this sensor.
2 Fibre Alliance MIB Object Types connUnitPortEntry [connUnitPortTable] Syntax ConnUnitPortEntry Access Not accessible Status Description Index Mandatory Each entry contains the information for a specific port.
Fibre Alliance MIB Object Types 2 connUnitPortUnitId [connUnitPortTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description The connUnitId of the connectivity unit that contains this port. Note: Same value as connUnitId. connUnitPortIndex [connUnitPortTable] Syntax Integer of size 1 to 2147483647 Access Read-only Status Mandatory Description A unique value among all connUnitPortEntrys on this connectivity unit, between 0 and connUnitNumPort.
2 Fibre Alliance MIB Object Types connUnitPortType [connUnitPortTable] Syntax Integer Table 2-14 Value Declaration Integer 1 (unknown) Description 2 (other) 3 (not-present) 4 (hub-port) 5 (n-port) End port for fabric 6 (l-port) End port for loop 7 (fl-port) Public loop 8 (f-port) Fabric port 9 (e-port) Fabric expansion port 10 (g-port 1) Generic fabric port 11 (domain-ctl) Domain controller 12 (hub-controller) 13 (scsi) Parallel SCSI port 14 (escon) 15 (lan) 16 (wan) Access Read-onl
Fibre Alliance MIB Object Types 2 connUnitPortFCClassCap [connUnitPortTable] Syntax Octet String of size 2 Access Read-only Status Mandatory Description Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to zero.
2 Fibre Alliance MIB Object Types connUnitPortState [connUnitPortTable] Syntax Table 2-16 Value Declaration Description Integer 1 (unavailable) Do not use. 2 (online) Available for meaningful work. 3 (offline) Not available for meaningful work. 4 (bypassed) No longer used. 5 (diagnostics) Map to your testing. Access Read-only Status Mandatory Description The state of the port hardware. Note: 2-34 For an E, F, or FL_port, the value is online.
Fibre Alliance MIB Object Types 2 connUnitPortStatus [connUnitPortTable] Syntax Table 2-17 Value Declaration Integer 1 (unknown) Access Read-only Status Mandatory Description Description 2 (unused) Device cannot report this status. 3 (ready) FCAL Loop or FCPH Link reset protocol initialization has completed. 4 (warning) Do not use. 5 (failure) Do not use. 6 (not participating) Loop not participating and does not have a loop address. 7 (initializing) Protocol is proceeding.
2 Fibre Alliance MIB Object Types connUnitPortTransmitterType [connUnitPortTable] Syntax Table 2-18 Value Declaration Integer 1 (unknown) Description 2 (other) 3 (unused) 4 (shortwave) 5 (longwave) 6 (copper) 7 (scsi) 8 (longwaveNoOFC) 9 (shortwaveNoOFC) 10 (longwaveLED) Access Read-only Status Mandatory Description The technology of the port transceiver. Note: 2-36 For an external FC_port, this value should be 9 (shortwaveNoOFC) or 8 (longwaveNoOFC). MIB Reference Manual Version 3.
Fibre Alliance MIB Object Types 2 connUnitPortModuleType [connUnitPortTable] Syntax Table 2-19 Value Declaration Integer 1 (unknown) Description 2 (other) 3 (GBIC) 4 (embedded) Fixed. (oneXnine) 5 (glm) 6 (gbicSerialId) 7 (gbicNoSerialId) 8 (gbicNotInstalled) 9 (smallFormFactor) Access Read-only Status Mandatory Description The module type of the port connector. Note: For an external FC_port with GBIC, this value should be 6 (gbicSerialId) or 7 (gbicNoSerialId).
2 Fibre Alliance MIB Object Types connUnitPortFCId [connUnitPortTable] Syntax Octet String of size 3 Access Read-only Status Mandatory Description This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is loop, then it is the ALPA that is connected. If this is an E_port, then it contains only the domain ID left justified, zero filled. If this port does not have a Fibre Channel address, return all bits set to 1.
Fibre Alliance MIB Object Types 2 connUnitPortVendor [connUnitPortTable] Syntax Display String of size 0 to 79 Access Read-only Status Mandatory Description The port vendor (for example, for a GBIC). Note: If GBIC is the serial ID, this returns the GBIC vendor name. Otherwise it returns a Null value. connUnitPortSpeed [connUnitPortTable] Syntax Integer Access Read-only Status Mandatory Description The speed of the port in kilobytes per second.
2 Fibre Alliance MIB Object Types If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific reset operation. Examples of these operations are: • • • • The Link Reset protocol. The Loop Initialization protocol. Re-synchronization occurring between the transceiver in the addressed port to the transceiver that the port is connected to.
Fibre Alliance MIB Object Types Note: 2 Return values are as follows: resetConnUnitPort - portDisable (F or E_port, loop for U_port) bypassConnUnitPort - portDisable (FL_port) unbypassConnUnitPort - portEnable (FL_port) offlineConnUnitPort - portDisable (E, F, FL_port) onlineConnUnitPort - portEnable (U) resetConnUnitPortCounters - clear the port stats counter.
2 Fibre Alliance MIB Object Types connUnitPortStatObject [connUnitPortTable] Syntax Object Identifier Access Read-only Status Mandatory Description This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of zero, then there are no statistics available for this port. The port type information helps identify the statistics objects that are found in the table.
Fibre Alliance MIB Object Types 2 connUnitPortProtocolOp [connUnitPortTable] Syntax Octet String of size 2 Access Read-only Status Mandatory Description This is the bit mask that specifies the driver level protocol(s) that are currently operational. Note: If this is not applicable, return all bits set to zero.
2 Fibre Alliance MIB Object Types connUnitPortHWState [connUnitPortTable] Syntax Table 2-21 Value Declaration Integer 1 (unknown) Access Read-only Status Mandatory Description Description 2 (failed) Port failed diagnostics (port_flt state) 3 (bypassed) FCAL bypass, loop only (not used) 4 (active) Connected to a device (light and sync are present) 5 (loopback) Port in ext loopback (loopback state) 6 (txfault) Transmitter fault (bad GBIC) 7 (noMedia) Media not installed (GBIC removed)
Fibre Alliance MIB Object Types 2 connUnitEventEntry [connUnitEventTable] Syntax ConnUnitEventEntry Access Not accessible Status Description Index Mandatory Each entry contains information on a specific event for the given connectivity unit.
2 Fibre Alliance MIB Object Types connUnitEventIndex [connUnitEventTable] Syntax Integer of size 1 to 2147483647 Access Read-only Status Mandatory Description Each connectivity unit has its own event buffer. As it wraps, it may write over previous events. This object is an index into the buffer. It is recommended that this table be read using “getNext”s to retrieve the initial table.
Fibre Alliance MIB Object Types 2 connUnitREventTime [connUnitEventTable] Syntax Display String of size 15 Access Read-only Status Mandatory Description This is the real time when the event occurred. It has the following format. DDMMYYYY HHMMSS where: DD=day number MM=month number YYYY=year number HH=hour number MM=minute number SS=seconds number If not applicable, return a NULL string.
2 Fibre Alliance MIB Object Types connUnitEventType [connUnitEventTable] Syntax Table 2-23 Value Declaration Integer 1 (unknown) Description 2 (other) 3 (status) 4 (configuration) 5 (topology) Access Read-only Status Mandatory Description The type of this event. Note: Always set to 2 (other). connUnitEventObject [connUnitEventTable] Syntax Object Identifier Access Read-only Status Mandatory Description This is used with the connUnitEventType to identify which object the event refers to.
Fibre Alliance MIB Object Types 2 connUnitEventDescr [connUnitEventTable] Syntax Display String Access Read-only Status Mandatory Description The description of the event. Note: The link table is intended to organize and communicate any information the agent has, that might assist a management application to discover the connectivity units in the framework and the topology of their interconnect.
2 Fibre Alliance MIB Object Types Connectivity Unit Link Table connUnitLinkTable Syntax Sequence of ConnUnitLinkEntry Access Not accessible Status Description Mandatory A list of links know to this agent from this connectivity unit to other connectivity units. Note: 2-50 X = switch data, Y = other end. MIB Reference Manual Version 3.
Fibre Alliance MIB Object Types 2 connUnitLinkEntry [connUnitLinkTable] Syntax ConnUnitLinkEntry Access Not accessible Status Description Index Mandatory An entry describing a particular link to another.
2 Fibre Alliance MIB Object Types connUnitLinkIndex [connUnitLinkTable] Syntax Integer of size 0 to 2147483647 Access Read-only Status Mandatory Description This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value is allowed to wrap at the highest value represented by the number of bits.
Fibre Alliance MIB Object Types 2 connUnitLinkPortWwnX [connUnitLinkTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description The port WWN of the unit specified by connUnitLinkNodeIdX if known, otherwise 16 octets of binary 0. Note: WWN of the port to which the device is connected. connUnitLinkNodeIdY [connUnitLinkTable] Syntax Octet String of size 64 Access Read-only Status Mandatory Description The node WWN of the unit at the other end of the link.
2 Fibre Alliance MIB Object Types connUnitLinkPortWwnY [connUnitLinkTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description The port WWN on the unit specified by connUnitLinkNodeIdY if known, otherwise 16 octets of binary 0. Note: ISL: WWN of the remote port. Device: Port name.
Fibre Alliance MIB Object Types 2 connUnitLinkAgentPortY [connUnitLinkTable] Syntax Integer Access Read-only Status Mandatory Description The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. Note: ISL: IP port. Device: 0 (Null). connUnitLinkUnitTypeY [connUnitLinkTable] Syntax FcUnitType Access Read-only Status Mandatory Description Type of the FC connectivity unit as defined in connUnitType. ISL: Switch device.
2 Fibre Alliance MIB Object Types connUnitLinkConnIdY [connUnitLinkTable] Syntax Octet String of size 3 Access Read-only Status Mandatory Description This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big Endian value of 24 bits. If this is loop, then it is the ALPA that is connected. If this is an E_port, then it contains only the domain ID. If not any of those, unknown or cascaded loop, return all bits set to 1.
Fibre Alliance MIB Object Types 2 connUnitPortStatTable Syntax Sequence of ConnUnitPortStatEntry Access Not accessible Status Description Mandatory A list of statistics for the fabric port types. MIB Reference Manual Version 3.
2 Fibre Alliance MIB Object Types connUnitPortStatEntry [connUnitPortStatTable] Syntax ConnUnitPortStatEntry Access Not accessible Status Description Index Mandatory An entry describing port statistics.
Fibre Alliance MIB Object Types Table 2-26 2 connUnitPortStatTable Objects and Object Types (Continued) connUnitPortStatCountClass3RxFrames: 2-66 Octet String connUnitPortStatCountClass3TxFrames: 2-67 Octet String connUnitPortStatCountClass3Discards: 2-67 Octet String connUnitPortStatCountRxMulticastObjects: 2-67 Octet String connUnitPortStatCountTxMulticastObjects: 2-67 Octet String connUnitPortStatCountRxBroadcastObjects: 2-68 Octet String connUnitPortStatCountTxBroadcastObjects: 2-68 Oct
2 Fibre Alliance MIB Object Types connUnitPortStatIndex [connUnitPortStatTable] Syntax Integer (0..2147483647) Access Read-only Status Mandatory Description A unique value among all entries in this table, between 0 and connUnitNumPort[connUnitPortUnitId]. connUnitPortStatCountError [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description A count of the errors that have occurred on this port.
Fibre Alliance MIB Object Types 2 connUnitPortStatCountTxElements [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of octets or bytes that have been transmitted by this port. One second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. Note: For Fibre Channel, ordered sets are not included in the count.
2 Fibre Alliance MIB Object Types connUnitPortStatCountFBSYFrames [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of times that FBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. Port can only occur on SOFc1 frames (the frames that establish a connection). Note: This is a Fibre Channel only stat.
Fibre Alliance MIB Object Types 2 connUnitPortStatCountPRJTFrames [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of times that FRJT was returned to this port as a result of a Frame that was rejected at the destination N_port. Note: This is the total for all classes and is a Fibre Channel only stat.
2 Fibre Alliance MIB Object Types connUnitPortStatCountClass1FBSYFrames [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of times that FBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection).
Fibre Alliance MIB Object Types 2 connUnitPortStatCountClass1PRJTFrames [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_port. Note: This is a Fibre Channel only stat. The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not support Class 1 Frames.
2 Fibre Alliance MIB Object Types connUnitPortStatCountClass2PBSYFrames [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of times that PBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if the destination N_port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). Note: This is a Fibre Channel only stat.
Fibre Alliance MIB Object Types 2 connUnitPortStatCountClass3TxFrames [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of Class 3 Frames transmitted out this port. Note: This is a Fibre Channel only stat. connUnitPortStatCountClass3Discards [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of Class 3 Frames that were discarded upon reception at this port.
2 Fibre Alliance MIB Object Types connUnitPortStatCountRxBroadcastObjects [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of Broadcast Frames or Packets received at this port. connUnitPortStatCountTxBroadcastObjects [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of Broadcast Frames or Packets transmitted out this port.
Fibre Alliance MIB Object Types 2 connUnitPortStatCountNumberLinkResets [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of Link resets and LIPs detected at this port. The number times the reset link protocol is initiated. These are the count of the logical resets, a count of the number of primitives. Note: This is a Fibre Channel only stat.
2 Fibre Alliance MIB Object Types connUnitPortStatCountLinkFailures [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of link failures. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) Note: This is a Fibre Channel only stat. connUnitPortStatCountInvalidCRC [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of frames received with invalid CRC.
Fibre Alliance MIB Object Types 2 connUnitPortStatCountPrimitiveSequenceProtocolErrors [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of primitive sequence protocol errors detected at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) Note: This is a Fibre Channel only stat.
2 Fibre Alliance MIB Object Types connUnitPortStatCountInvalidOrderedSets [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). Note: This is a Fibre Channel only stat.
Fibre Alliance MIB Object Types 2 connUnitPortStatCountAddressErrors [connUnitPortStatTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The number of frames received with unknown addressing. For example, unknown SID or DID. The SID or DID is not known to the routing algorithm. Note: This is a Fibre Channel only stat.
2 Fibre Alliance MIB Object Types The Service Group Implementation of the Service group is mandatory for all systems. The Service group contains two subgroups: • • 2-74 The Connectivity Unit Service Scalers Group The Connectivity Unit Service Tables Group MIB Reference Manual Version 3.
Fibre Alliance MIB Object Types 2 The Connectivity Unit Service Scalers Group Implementation of the Connectivity Unit Service Scalers group is mandatory for all systems. connUnitSnsMaxEntry Syntax Integer Access Read-only Status Mandatory Description The maximum number of entries in the table. MIB Reference Manual Version 3.
2 Fibre Alliance MIB Object Types The Connectivity Unit Service Tables Group Implementation of the Connectivity Unit Service Tables group is mandatory for all systems. Connectivity Unit Simple Name Server Table connUnitSnsTable Syntax Sequence of ConnUnitSnsEntry Access Not accessible Status Description 2-76 Mandatory This table contains an entry for each object registered with this port in the switch. MIB Reference Manual Version 3.
Fibre Alliance MIB Object Types 2 connUnitSnsEntry [connUnitSnsTable] Syntax ConnUnitSnsEntry Access Not accessible Status Description Index Mandatory The Simple Name Server table for the port represented by connUnitSnsPortIndex.
2 Fibre Alliance MIB Object Types connUnitSnsPortIndex [connUnitSnsTable] Syntax Integer Access Read-only Status Mandatory Description The physical port number of this SNS table entry. Each physical port has an SNS table with 1-n entries indexed by connUnitSnsPortIdentifier (port address) connUnitSnsPortIdentifier [connUnitSnsTable] Syntax FcAddressId Access Read-only Status Mandatory Description The port identifier for this entry in the SNS table.
Fibre Alliance MIB Object Types 2 connUnitSnsClassOfSvc [connUnitSnsTable] Syntax Octet String of size 1 Access Read-only Status Mandatory Description The Classes of Service offered by this entry in the SNS table. connUnitSnsNodeIPAddress [connUnitSnsTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description The IPv6 formatted address of the Node for this entry in the SNS table.
2 Fibre Alliance MIB Object Types connUnitSnsPortType [connUnitSnsTable] Syntax Octet String of size 1 Access Read-only Status Mandatory Description The port type of this entry in the SNS table. connUnitSnsPortIPAddress [connUnitSnsTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description The IPv6 formatted address of this entry in the SNS table.
Fibre Alliance MIB Object Types 2 connUnitSnsSymbolicPortName [connUnitSnsTable] Syntax Display String of size 0..79 Access Read-only Status Mandatory Description The symbolic port name of this entry in the SNS table. connUnitSnsSymbolicNodeName [connUnitSnsTable] Syntax Display String of size 0..79 Access Read-only Status Mandatory Description The Symbolic Node Name of this entry in the SNS table. MIB Reference Manual Version 3.
2 Fibre Alliance MIB Object Types The SNMP Trap Registration Group trapMaxClients Syntax Integer Access Read-only Status Mandatory Description The maximum number of SNMP trap recipients supported by the connectivity unit. Note: Set to 6. trapClientCount Syntax Integer Access Read-only Status Mandatory Description The current number of rows in the trap table.
Fibre Alliance MIB Object Types 2 trapRegEntry [trapRegTable] Syntax TrapRegEntry Access Not accessible Status Mandatory Description Ip/Port pair for a specific client.
2 Fibre Alliance MIB Object Types trapRegFilter [trapRegTable] Syntax FcEventSeverity Access Read-write Status Mandatory Description This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that have a severity level less than or equal to this value. The default value of this object is “Warning”. Note: 2-84 This severity applies to all entries. See FcEventSeverity in Table 2-1 on page 2-6. MIB Reference Manual Version 3.
Fibre Alliance MIB Object Types 2 trapRegRowState [trapRegTable] Syntax Table 2-29 Value Declaration Description Integer 1 (rowDestroy) Remove row from table. 2 (rowInactive) Row exists, but TRAPs disabled. 3 (rowActive) Row exists and is enabled for sending traps. Access Read-write Status Mandatory Description Specifies the state of the row. Table 2-30 TrapRegRowState for Read/Write rowDestroy READ: Can never happen. WRITE: Remove this row from the table.
2 Fibre Alliance MIB Object Types The Revision Number revisionNumber Syntax Display String of size 4 Access Read-only Status Mandatory Description This is the revision number for this MIB. The format of the revision value is as follows: 0 = High order major revision number 1 = Low order major revision number 2 = High order minor revision number 3 = Low order minor revision number The value is stored as an ASCII value. The following is the current value of this object.
Fibre Alliance MIB Object Types 2 The Statistics Group Port types are aggregated into a port type class, such as all the fabric port types. There is one statistics table for each individual port. For all objects in statistics tables, if the object is not supported by the conn unit then the high order bit is set to 1 with all other bits set to zero. The high order bit is reserved to indicate if the object is supported or not.
2 Fibre Alliance MIB Object Types Related Traps connUnitStatusChange Enterprise Variables Description fcmgmt connUnitStatus, connUnitState The overall status of the connectivity unit has changed. Recommended severity level (for filtering): alert. Note: Generated when connUnitStatus changes, refer to the connUnitStatus section for a description of how the value is calculated. connUnitDeletedTrap Enterprise Variables Description fcmgmt connUnitId A connUnit has been deleted from this agent.
Fibre Alliance MIB Object Types 2 connUnitPortStatusChange Enterprise Variables Description fcmgmt connUnitPortStatus, connUnitPortState Overall status of the connectivity unit changed. Recommended severity level (for filtering): alert. MIB Reference Manual Version 3.
2 2-90 Fibre Alliance MIB Object Types MIB Reference Manual Version 3.
Chapter FCFabric Element MIB Object Types 3 This chapter contains descriptions and other information that is specific to FCFabric Element MIB (in the experimental branch) and Fibre Channel FE MIB (in the standard branch) (FE-MIB) object types, including the following: • • • • • • • Overview on page 3-2 Definitions for FE-MIB on page 3-5 The Configuration Group on page 3-9 The Operation Group on page 3-20 The Error Group on page 3-33 Accounting Group on page 3-38 The Capability Group on page 3-39 MIB R
3 FCFabric Element MIB Object Types Overview Note: Two versions of FE-MIB for version 3.0.1b or later of the Fabric OS are supported: • • FCFabric Element MIB is supported in the experimental branch. Fibre Channel FE MIB is supported in the standard branch.
FCFabric Element MIB Object Types Figure 3-2 MIB Reference Manual Version 3.
3 FCFabric Element MIB Object Types Figure 3-3 3-4 Tree Structure for fcFeError, fcFeAcct, and fcFeCap Tables MIB Reference Manual Version 3.
FCFabric Element MIB Object Types 3 Definitions for FE-MIB The following definitions are used for FE-MIB. Table 3-1 MIB-II Conventions Type Definition Value Display String Octet String of size 0 to 255 MilliSeconds Integer from 0 to 2147383647 MicroSeconds Integer from 0 to 2147383647 FcNameId Octet String of size 8 Worldwide Name or Fibre Channel Name associated with an FC entity.
3 FCFabric Element MIB Object Types Table 3-1 MIB-II Conventions (Continued) Type Definition Value FcRxDataFieldSize Integer from 128 to 2112 FcBbCredit Integer from 0 to 32767 FcphVersion Integer from 0 to 255 FcStackedConnMode Integer from 1 to 3 Declaration Description 1 (none) 2 (transparent) 3 (lockedDown) FcCosCap Integer from 1 to 127 bit 0 (Class F) bit 1 (Class 1) bit 2 (Class 2) bit 3 (Class 3) bit 4 (Class 4) bit 5 (Class 5) bit 6 (Class 6) bit 7 (Reserved for future) Fc0BaudR
FCFabric Element MIB Object Types Table 3-1 3 MIB-II Conventions (Continued) Type Definition Value Declaration Fc0MediaCap Integer from 0 to 65535 bit 0 (unknown) Description bit 1 (single mode fibre (sm)) bit 2 (multi-mode fibre 50 micron (m5)) bit 3 (multi-mode fibre 62.
3 FCFabric Element MIB Object Types Table 3-1 MIB-II Conventions (Continued) Type Definition Value Declaration Fc0Distance Integer The FC-0 distance range associated with a port transmitter Description 1 (unknown) 2 (long) 3 (intermediate) 4 (short) FcFeModuleCapacity Integer from 1to 256 FcFeFxPortCapacity Integer from 1to 256 FcFeModuleIndex Integer from 1to 256 FcFeFxPortIndex Integer from 1to 256 FcFeNxPortIndex Integer from 1to 256 FcFxPortMode Integer 1 (unknown) 2 (fPort) 3 (fl
FCFabric Element MIB Object Types 3 The Configuration Group This group consists of scalar objects and tables. It contains the configuration and service parameters of the Fabric Element and the FxPorts. The group represents a set of parameters associated with the Fabric Element or an FxPort to support its NxPorts. Implementation of this group is mandatory.
3 FCFabric Element MIB Object Types fc Fabric Element Module Table This table contains one entry for each module, information of the modules. fcFeModuleTable Syntax Sequence of FcFeModuleEntry Access Not accessible Status Description Mandatory A table that contains, one entry for each module in the Fabric Element, information of the modules.
FCFabric Element MIB Object Types 3 fcFeModuleDescr [fcFeModuleTable] Syntax Display String Access Read-only Status Mandatory Description A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Note: See sysDescr in the MIB-II Object Types chapter.
3 FCFabric Element MIB Object Types fcFeModuleLastChange [fcFeModuleTable] Syntax TimeTicks Access Read-only Status Mandatory Description Contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of the module has not changed since the agent last restarted.
FCFabric Element MIB Object Types 3 FxPort Configuration Table This table contains one entry for each FxPort and the configuration parameters of the ports. fcFxConfTable Syntax Sequence of FcFxConfEntry Access Not accessible Status Description Mandatory A table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts.
3 FCFabric Element MIB Object Types Table 3-3 FcFxConfEntry Objects and Object Types fcFxConfModuleIndex: 3-14 FcFeModuleIndex fcFxConfFxPortIndex: 3-15 FcFeFxPortIndex fcFxPortName: 3-15 FcPortName FxPort Common Service Parameters fcFxPortFcphVersionHigh: 3-15 FcphVersion fcFxPortFcphVersionLow: 3-15 FcphVersion fcFxPortBbCredit: 3-16 FcBbCredit fcFxPortRxBufSize: 3-16 FcRxDataFieldSize fcFxPortRatov: 3-16 MilliSeconds fcFxPortEdtov: 3-16 MilliSeconds FxPort Class Service Parameters f
FCFabric Element MIB Object Types 3 fcFxConfFxPortIndex [fcFxConfTable] Syntax FcFeFxPortIndex Access Read-only Status Mandatory Description Identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. fcFxPortName [fcFxConfTable] Syntax FcPortName Access Read-only Status Mandatory Description The name identifier of this FxPort.
3 FCFabric Element MIB Object Types fcFxPortBbCredit [fcFxConfTable] Syntax FcBbCredit Access Read-only Status Mandatory Description The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached NxPort (if applicable) to FxPort.
FCFabric Element MIB Object Types 3 FxPort Class Service Parameters fcFxPortCosSupported [fcFxConfTable] Syntax FcCosCap Access Read-only Status Mandatory Description A value indicating the set of Classes of Service supported by the FxPort. fcFxPortIntermixSupported [fcFxConfTable] Syntax Value Declaration Description Integer 1 (yes) FxPort supports an Intermixed Dedicated Connection. 2 (no) FxPort does not support an Intermixed Dedicated Connection.
3 FCFabric Element MIB Object Types fcFxPortClass2SeqDeliv [fcFxConfTable] Syntax Value Declaration Description Integer 1 (yes) Class 2 Sequential Delivery is supported by the FxPort. 2 (no) Class 2 Sequential Delivery is not supported by the FxPort. Access Read-only Status Mandatory Description A flag indicating whether Class 2 Sequential Delivery is supported by the FxPort.
FCFabric Element MIB Object Types 3 fcFxPortBaudRate [fcFxConfTable] Syntax Fc0BaudRate Access Read-only Status Deprecated Description The FC-0 baud rate of the FxPort. Note: The valid value for FC Entry Switch 8B, FC Switch 8B, or FC 16B: 16 (full), 32 (double) fcFxPortMedium [fcFxConfTable] Syntax Fc0Medium Access Read-only Status Deprecated Description The FC-0 medium of the FxPort.
3 FCFabric Element MIB Object Types The Operation Group This group consists of tables that contains operational status and established service parameters for the Fabric Element and the attached NxPorts. Implementation of this group is mandatory. FxPort Operation Table This table contains one entry for each FxPort, the operational status, and parameters of the FxPorts.
FCFabric Element MIB Object Types Table 3-4 3 fcFxPortOperEntry Objects and Object Types fcFxPortOperModuleIndex: 3-21 FcFeModuleIndex fcFxPortOperFxPortIndex: 3-21 FcFeFxPortIndex fcFxPortID: 3-21 FcAddressId fcFPortAttachedPortName: 3-22 FcPortName fcFPortConnectedPort: 3-22 FcAddressId fcFxPortBbCreditAvailable: 3-22 Gauge fcFxPortOperMode: 3-22 FcFxPortMode fcFxPortAdminMode: 3-23 FcFxPortMode fcFxPortOperModuleIndex [fcFxPortOperTable] Syntax FcFeModuleIndex Access Read-only Sta
3 FCFabric Element MIB Object Types fcFPortAttachedPortName [fcFxPortOperTable] Syntax FcPortName Access Read-only Status Deprecated Description The port name of the attached N_Port, if applicable. If the value of this object is ‘0000000000000000’H, this FxPort has no NxPort attached to it. This variable has been deprecated and may be implemented for backward compatibility.
FCFabric Element MIB Object Types 3 fcFxPortAdminMode [fcFxPortOperTable] Syntax FcFxPortMode Access Read-only -- instead of read-write Status Description Mandatory The desired operational mode of the FxPort. F_Port Fabric Login Table This table contains, one entry for each F_Port in the Fabric Element and the Service Parameters that have been established from the most recent Fabric Login (implicit or explicit). Note: This table is deprecated since FEMIB v1.9.
3 FCFabric Element MIB Object Types fcFxPortPhysEntry [fcFxPortPhysTable] Syntax FcFxPortPhysEntry Access Not accessible Status Description Index Mandatory An entry containing physical level status and parameters of a FxPort.
FCFabric Element MIB Object Types 3 fcFxPortPhysAdminStatus [fcFxPortPhysTable] Syntax Value Declaration Description Integer 1 (online) Place port online. 2 (offline) Take port offline. 3 (testing) Initiate test procedures. Access Read-write Status Mandatory Description The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The 3 (testing) state indicates that no operational frames can be passed.
3 FCFabric Element MIB Object Types fcFxPortPhysLastChange [fcFxPortPhysTable] Syntax TimeTicks Access Read-only Status Mandatory Description The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort’s operational status has not changed since the agent last restarted.
FCFabric Element MIB Object Types 3 FxPort Fabric Login Table This table contains, one entry for each FxPort in the Fabric Element and the Service Parameters that have been established from the most recent Fabric Login, whether implicit or explicit.
3 FCFabric Element MIB Object Types Table 3-6 FcFxlogiEntry Objects and Object Types fcFxlogiModuleIndex: 3-28 FcFeModuleIndex fcFxlogiFxPortIndex: 3-28 FcFeFxPortIndex fcFxlogiNxPortIndex: 3-29 FcFeNxPortIndex fcFxPortFcphVersionAgreed: 3-29 FcphVersion fcFxPortNxPortBbCredit: 3-29 FcBbCredit fcFxPortNxPortRxDataFieldSize: 3-29 FcRxDataFieldSize fcFxPortCosSuppAgreed: 3-30 FcCosCap fcFxPortIntermixSuppAgreed: 3-30 Integer fcFxPortStackedConnModeAgreed: 3-30 FcStackedConnMode fcFxPortC
FCFabric Element MIB Object Types 3 fcFxlogiNxPortIndex [fcFxlogiTable] Syntax FcFeNxPortIndex Access Read-only Status Mandatory Description The object identifies the associated NxPort in the attachment for which the entry contains information. fcFxPortFcphVersionAgreed [fcFxlogiTable] Syntax FcphVersion Access Read-only Status Mandatory Description The version of FC-PH that the FxPort has agreed to support from the Fabric Login.
3 FCFabric Element MIB Object Types fcFxPortCosSuppAgreed [fcFxlogiTable] Syntax FcCosCap Access Read-only Status Mandatory Description Indicates that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request. fcFxPortIntermixSuppAgreed [fcFxlogiTable] Syntax Value Declaration Description Integer 1 (yes) The attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request.
FCFabric Element MIB Object Types 3 fcFxPortClass2SeqDelivAgreed [fcFxlogiTable] Syntax Value Declaration Description Integer 1 (yes) The FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. 2 (no) The FxPort has not agreed to support Class 2 sequential delivery from the Fabric Login. Access Read-only Status Mandatory Description A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login.
3 FCFabric Element MIB Object Types fcFxPortConnectedNxPort [fcFxlogiTable] Syntax FcAddressId Access Read-only Status Mandatory Description The address identifier of the destination FxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If the value of this object is ‘000000’H, this FxPort is not engaged in a connection.
FCFabric Element MIB Object Types 3 The Error Group This group consists of tables that contain information about the various types of errors detected. The management station may use the information in this group to determine the quality of the link between the FxPort and its attached NxPort. Implementation of this group is optional.
3 FCFabric Element MIB Object Types fcFxPortErrorEntry [fcFxPortErrorTable] Syntax FcFxPortErrorEntry Access Not accessible Status Description Index Mandatory An entry containing error counters of a FxPort.
FCFabric Element MIB Object Types 3 fcFxPortErrorFxPortIndex [fcFxPortErrorTable] Syntax FcFeFxPortIndex Access Read-only Status Mandatory Description Identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized.
3 FCFabric Element MIB Object Types fcFxPortPrimSeqProtoErrors [fcFxPortErrorTable] Syntax Counter Access Read-only Status Mandatory Description The number of primitive sequence protocol errors detected by the FxPort. fcFxPortInvalidTxWords [fcFxPortErrorTable] Syntax Counter Access Read-only Status Mandatory Description The number of invalid transmission word detected by the FxPort.
FCFabric Element MIB Object Types 3 fcFxPortLinkResetIns [fcFxPortErrorTable] Syntax Counter Access Read-only Status Mandatory Description The number of Link Reset Protocol received by this FxPort from the attached NxPort. fcFxPortLinkResetOuts [fcFxPortErrorTable] Syntax Counter Access Read-only Status Mandatory Description The number of Link Reset Protocol issued by this FxPort to the attached NxPort.
3 FCFabric Element MIB Object Types Accounting Group The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not support Accounting tables. This section is not applicable. The Class 1 Accounting Table The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not support Accounting tables. This section is not applicable. Class 2 Accounting Table The FC Entry Switch 8B, FC Switch 8B, and FC 16B do not support Accounting tables. This section is not applicable.
FCFabric Element MIB Object Types 3 The Capability Group This group consists of a table describing information about what each FxPort is inherently capable of operating or supporting. A capability may be used, as expressed in its respective object value in the Configuration group. Implementation of this group is optional.
3 FCFabric Element MIB Object Types fcFxPortCapEntry [fcFxPortCapTable] Syntax FcFxPortCapEntry Access Not accessible Status Description Index Mandatory An entry containing the capabilities of a FxPort.
FCFabric Element MIB Object Types 3 fcFxPortCapFxPortIndex [fcFxPortCapTable] Syntax FcFeFxPortIndex Access Read-only Status Mandatory Description Identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized.
3 FCFabric Element MIB Object Types fcFxPortCapBbCreditMin [fcFxPortCapTable] Syntax FcBbCredit Access Read-only Status Mandatory Description The minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.
FCFabric Element MIB Object Types 3 fcFxPortCapIntermix [fcFxPortCapTable] Syntax Value Declaration Description Integer 1 (yes) The FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. 2 (no) The FxPort is not capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection.
3 FCFabric Element MIB Object Types fcFxPortCapClass3SeqDeliv [fcFxPortCapTable] Syntax Value Declaration Description Integer 1 (yes) The FxPort is capable of supporting Class 3 Sequential Delivery. 2 (no) The FxPort is capable of supporting Class 3 Sequential Delivery. Access Read-only Status Mandatory Description A flag indicating whether the FxPort is capable of supporting Class 3 Sequential Delivery.
FCFabric Element MIB Object Types 3 fcFxPortCapMedia [fcFxPortCapTable] Syntax Fc0MediaCap Access Read-only Status Deprecated Description A value indicating the set of media that the FxPort is capable of supporting. This variable has been Deprecated and may be implemented for backward compatibility. MIB Reference Manual Version 3.
3 3-46 FCFabric Element MIB Object Types MIB Reference Manual Version 3.
Chapter FCSwitch MIB Object Types 4 This chapter contains descriptions and other information that is specific to FC Switch MIB (SW-MIB) object types.
4 FCSwitch MIB Object Types Overview The object types in SW-MIB are organized into the following groupings: • • • • • • • • • • • • swSystem swFabric swModule swActCfg swFCport swNs swEvent swFwSystem swEndDevice swGroup swBlmPerfMnt swTrunk The SW-MIB FCSwitch is organized as follows: bcsi commDev fibrechannel fcSwitch sw sw28k sw21kN24k sw20x0 Figure 4-1 4-2 enterprises (1588) Product Lines or Generic Product Information bcsi (1) = Reserved bcsi (2) = Communication devices commDev (1) fibrechannel
FCSwitch MIB Object Types 4 SW-MIB File System Organization The following graphics depict the organization and structure of SW-MIB: Figure 4-2 MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types Figure 4-3 4-4 Tree Structure for swSystem, swFabric, swAgtCfg, and swFCPort groups MIB Reference Manual Version 3.
FCSwitch MIB Object Types Figure 4-4 MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types Figure 4-5 4-6 Tree Structure for swBlm, and swTrunk groups MIB Reference Manual Version 3.
FCSwitch MIB Object Types 4 Definitions for SW-MIB The following definitions are used for SW-MIB.
4 FCSwitch MIB Object Types Table 4-1 SW-MIB Definitions (Continued) Type Definition Value Declaration SwFwClassesAreas Integer 1 (swFwEnvTemp) Description 2 (swFwEnvFan) 3 (swFwEnvPs) 4 (swFwGbicTemp) 5 (swFwGbicRxp) 6 (swFwGbicTxp) 7 (swFwGbicCurrent) 8 (swFwPortLink) 9 (swFwPortSync) 10 (swFwPortSignal) 11 (swFwPortPe) 12 (swFwPortWords) 13 (swFwPortCrcs) 14 (swFwPortRXPerf) 15 (swFwPortTXPerf) 16 (swFwPortState) 17 (swFwFabricEd) 18 (swFwFabricFr) 19 (swFwFabricDi) 20 (swFwFabricSc) 21 (swFwF
FCSwitch MIB Object Types Table 4-1 4 SW-MIB Definitions (Continued) Type Definition Value Declaration SwFwClassesAreas (Continued) Integer 31 (swFwEPortRXPerf) Description 32 (swFwEPortTXPerf) 33 (swFwEPortState) 34 (swFwFCUPortLink) 35 (swFwFCUPortSync) 36 (swFwFCUPortSignal) 37 (swFwFCUPortPe) 38 (swFwFCUPortWords) 39 (swFwFCUPortCrcs) 40 (swFwFCUPortRXPerf) 41 (swFwFCUPortTXPerf) 42 (swFwFCUPortState) 43 (swFwFOPPortLink) 44 (swFwFOPPortSync) 45 (swFwFOPPortSignal) 46 (swFwFOPPortPe) 47 (swFw
4 FCSwitch MIB Object Types Table 4-1 SW-MIB Definitions (Continued) Type Definition Value Declaration SwFwEvent Integer 1 (started) Description 2 (changed) 3 (exceeded) 4 (below) 5 (above) 6 (inBetween) SwFwBehavior Integer 1 (triggered) 2 (continuous) SwFwState Integer 1 (swFwInformative) 2 (swFwNormal) 3 (swFwFaulty) SwFwLicense Integer 1 (swFwLicensed) 2 (swFwNotLicensed) 4-10 MIB Reference Manual Version 3.
FCSwitch MIB Object Types 4 The System Group swCurrentDate Syntax Display String of size 0 to 64 Access Read-only Status Mandatory Description The current date and time. Note: The return string is displayed using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = Day MMM = Month DD = Date hh = Hour mm = Minute ss = Seconds yyyy = Year For example: Thu Aug 17 15:16:09 2000.
4 FCSwitch MIB Object Types swFWLastUpdated Syntax Display String of size 0 to 64 Access Read-only Status Mandatory Description The date and time when the firmware was last loaded to the switch. Note: The return string is displayed using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = Day MMM = Month DD = Date hh = Hour mm = Minute ss = Seconds yyyy = Year For example: Thu Aug 17 15:16:09 2000.
FCSwitch MIB Object Types 4 swBootPromLastUpdated Syntax Display String of size 0 to 64 Access Read-only Status Mandatory Description The date and time when the BootPROM was last updated. Note: The return string is displayed using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = Day MMM = Month DD = Date hh = Hour mm = Minute ss = Seconds yyyy = Year For example: Thu Aug 17 15:16:09 2000.
4 FCSwitch MIB Object Types swOperStatus Syntax Value Declaration Description Integer 1 (online) The switch is accessible by an external Fibre Channel port. 2 (offline) The switch is not accessible. 3 (testing) The switch is in a built-in test mode and is not accessible by an external Fibre Channel port. 4 (faulty) The switch is not operational. Access Read-only Status Mandatory Description The current operational status of the switch.
FCSwitch MIB Object Types 4 swTelnetShellAdmStatus Syntax Value Declaration Description Integer 0 (unknown) The status of the current telnet shell task is unknown. 1 (terminated) The current telnet shell task is deleted. Access Read-write Status Mandatory Description The desired administrative status of the telnet shell. Note: MIB Reference Manual Version 3.0 By setting it to 1 (terminated), the current telnet shell task is deleted.
4 FCSwitch MIB Object Types swSsn Syntax Display String of size 0 to 128 Access Read-only Status Mandatory Description The soft serial number of the switch. Note: By default, the return value is the WWN of the switch. FLASH Administration The next 5 objects are related to firmware or configuration file management. The underlying method in the transfer of the firmware or configuration file is based on either FTP or remote shell. If a password is provided, then FTP is used.
FCSwitch MIB Object Types 4 swFlashDLOperStatus Syntax Value Declaration Description Integer 1 (swCurrent) The FLASH contains the current firmware image or configuration file. 2 (swFwUpgraded) The FLASH contains the image upgraded from the swFlashDLHost.0. 3 (swCfUploaded) The switch configuration file has been uploaded to the host. 4 (swCfDownloaded) The switch configuration file has been downloaded from the host.
4 FCSwitch MIB Object Types swFlashDLHost Syntax Display String of size 0 to 64 Access Read-write Status Mandatory Description The name or IP address (in dot notation) of the host to download or upload a relevant file to the FLASH. swFlashDLUser Syntax Display String of size 0 to 64 Access Read-write Status Mandatory Description The user name on the host that is used for downloading or uploading a relevant file, to or from the FLASH.
4 FCSwitch MIB Object Types swBeaconOperStatus Syntax Value Declaration Description Integer 1 (on) The LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. 2 (off) Each LED is in its regular status, indicating color and state. Access Read-only Status Mandatory Description The current operational status of the switch beacon.
4 FCSwitch MIB Object Types swDiagResult Syntax Value Declaration Description Integer 1 (sw-ok) The switch is OK. 2 (sw-central-memory-fault) The switch has experienced a central memory fault. 3 (sw-embedded-port-fault) The switch has experienced an embedded port fault. Access Read-only Status Mandatory Description The result of the power-on startup (POST) diagnostics.
FCSwitch MIB Object Types 4 swSensorEntry [swSensorTable] Syntax SwSensorEntry Access Not accessible Status Description Index Mandatory An entry of the sensor information.
4 FCSwitch MIB Object Types swSensorStatus [swSensorTable] Syntax Value Declaration Description Integer 1 (unknown) The status of the sensor is unknown. 2 (faulty) The status of the sensor is in a faulty state. 3 (below-min) The sensor value is below the minimal threshold. 4 (nominal) The status of the sensor is in a nominal state. 5 (above-max) The sensor value is above the maximum threshold. 6 (absent) The sensor is missing.
FCSwitch MIB Object Types 4 swSensorInfo [swSensorTable] Syntax Display String of size 0 to 255 Access Read-only Status Mandatory Description Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, Temp 3 or Fan 6.
4 FCSwitch MIB Object Types The Fabric Group swDomainID Syntax SwDomainIndex Access Read-write Status Mandatory Description The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state. swPrincipalSwitch Syntax Value Declaration Description Integer 1 (yes) This is the principal switch for FC-SW. 2 (no) This is not the principal switch for FC-SW.
FCSwitch MIB Object Types 4 swNbTable Syntax Sequence of SwNbEntry Access Not accessible Status Description Mandatory This table contains the ISLs in the immediate neighborhood of the switch. swNbEntry [swNbTable] Syntax SwNbEntry Access Not accessible Status Description Index Mandatory An entry containing each neighbor ISL parameters.
4 FCSwitch MIB Object Types swNbMyPort [swNbTable] Syntax Value Declaration Integer 1 (portNum-0) Description 2 (portNum-1) 3 (portNum-2) 4 (portNum-3) 5 (portNum-4) 6 (portNum-5) 7 (portNum-6) 8 (portNum-7) 9 (portNum-8) 10 (portNum-9) 11 (portNum-10) 12 (portNum-11) 13 (portNum-12) 14 (portNum-13) 15 (portNum-14) 16 (portNum-15) Access Read-only Status Mandatory Description This is the port that has an ISL to another switch. Note: The physical port number of the local switch, plus one.
FCSwitch MIB Object Types 4 swNbRemDomain [swNbTable] Syntax SwDomainIndex Access Read-only Status Mandatory Description This is the Fibre Channel domain on the other end of the ISL. Note: This is the domain ID of the remote switch.Valid values for the FC Entry Switch 8B, FC Switch 8B, and FC 16B are 1 through 239 as defined by FCS-SW.
4 FCSwitch MIB Object Types swNbBaudRate [swNbTable] Syntax Value Declaration Description Integer 1 (other) None of below. 2 (oneEighth) 155 Mbaud. 4 (quarter) 266 Mbaud. 8 (half) 532 Mbaud. 16 (full) 1 Gbaud. 32 (double) 2 Gbaud. 64 (quadruple) 4 Gbaud. Access Read-only Status Mandatory Description The baud rate of the ISL.
FCSwitch MIB Object Types 4 swNbIslCost [swNbTable] Syntax Integer Access Read-write Status Mandatory Description The current link cost of the ISL. In other words, the cost of a link to control the routing algorithm. swNbRemPortName [swNbTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The WWN of the remote port. MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types The SW Agent Configuration Group SNMP Agent Community String Table swAgtCmtyTable Syntax Sequence of SwAgtCmtyEntry Access Not accessible Status Description Mandatory A table that contains, one entry for each Community, the access control and parameters of the Community. swAgtCmtyEntry [swAgtCmtyTable] Syntax SwAgtCmtyEntry Access Not accessible Status Description Index Mandatory An entry containing the Community parameters.
FCSwitch MIB Object Types 4 swAgtCmtyStr [swAgtCmtyTable] Syntax Display String of size 0 to 16 Access Read-write Status Mandatory Description This is a Community string supported by the agent. If a new value is set successfully, it takes effect immediately. Note: Default values for communities are as follows: • • • • • • Secret COde OrigEquipMfr private public common FibreChannel Change the Community setting using the agtcfgSet telnet command.
4 FCSwitch MIB Object Types The Fibre Channel Port Group This group contains information about the physical state, operational status, performance and error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which supports the Fibre Channel protocol. For example, F_Port, E_Port, U_Port, FL_Port. swFCPortCapacity Syntax Integer Access Read-only Status Mandatory Description The number of Fibre Channel ports on this switch.
FCSwitch MIB Object Types 4 swFCPortEntry [swFCPortTable] Syntax SwFCPortEntry Access Not accessible Status Description Index Mandatory An entry containing the configuration and service parameters of the switch port.
4 FCSwitch MIB Object Types Table 4-5 SwFCPortEntry Objects and Object Types (Continued) LIP Statistics swFCPortLipIns: 4-41 Counter, swFCPortLipOuts: 4-42 Counter, swFCPortLipLastAlpa: 4-42 Octet String of size 4 swFCPortWwn: 4-42 Octet String Port Speed Statistics swFCPortSpeed: 4-42 Integer swFCPortIndex [swFCPortTable] Syntax Value Declaration Description Integer 1 (portNum-0) Port Number 0. 2 (portNum-1) Port Number 1. 3 (portNum-2) Port Number 2. 4 (portNum-3) Port Number 3.
FCSwitch MIB Object Types 4 swFCPortType [swFCPortTable] Syntax Value Declaration Integer 1 (stitch) Description 2 (flannel) 3 (2000 Series) 4 (3000Series) Access Read-only Status Mandatory Description The type of ASIC for the switch port. The valid value for the FC Entry Switch 8B, FC Switch 8B, and FC 16B: 4 swFCPortPhyState [swFCPortTable] Syntax Value Declaration Description Integer 1 (noCard) No card is present in this switch slot. 2 (noGbic) No GBIC module in this port.
4 FCSwitch MIB Object Types swFCPortOpStatus [swFCPortTable] Syntax Value Declaration Description Integer 0 (unknown) The port module is physically absent. 1 (online) User frames can be passed. 2 (offline) No user frames can be passed. 3 (testing) No user frames can be passed. 4 (faulty) The port module is physically faulty. Access Read-only Status Mandatory Description The operational status of the port.
FCSwitch MIB Object Types 4 swFCPortLinkState [swFCPortTable] Syntax Value Declaration Description Integer 1 (enabled) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in a FC-AL loop). 2 (disabled) The port is not allowed to participate in the FC-PH protocol with its attached port(s). 3 (loopback) The port may transmit frames through an internal path to verify the health of the transmitter and receiver path.
4 FCSwitch MIB Object Types swFCPortRxWords [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of Fibre Channel words that the port has received. swFCPortTxFrames [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of Fibre Channel frames that the port has transmitted.
FCSwitch MIB Object Types 4 swFCPortRxLCs [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of Link Control frames that the port has received. swFCPortRxMcasts [swFCPortTable] Syntax Counter Access Read-only Status Description Mandatory Counts the number of Multicast frames that the port has received.
4 FCSwitch MIB Object Types swFCPortRxCrcs [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of CRC errors detected for frames received. swFCPortRxTruncs [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of truncated frames that the port has received.
FCSwitch MIB Object Types 4 swFCPortRxBadOs [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of invalid Ordered Sets received. swFCPortC3Discards [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of Class 3 frames that the port has discarded.
4 FCSwitch MIB Object Types swFCPortLipOuts [swFCPortTable] Syntax Counter Access Read-only Status Mandatory Description Counts the number of Loop Initializations that has been initiated by the port. swFCPortLipLastAlpa [swFCPortTable] Syntax Octet String of size 4 Access Read-only Status Mandatory Description Indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization.
FCSwitch MIB Object Types 4 The Name Server Database Group swNsLocalNumEntry Syntax Integer Access Read-only Status Mandatory Description The number of local Name Server entries. sw Name Server Local Table swNsLocalTable Syntax Sequence of SwNsEntry Access Not accessible Status Description Mandatory The table of local Name Server entries. MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types swNsLocalEntry [swNsLocalTable] Syntax SwNsEntry Access Not accessible Status Description Index Mandatory An entry from the local Name Server database.
FCSwitch MIB Object Types 4 swNsPortID [swNsLocalTable] Syntax Octet String of size 4 Access Read-only Status Mandatory Description The Fibre Channel port address ID of the entry. swNsPortType [swNsLocalTable] Syntax Value Declaration Description Integer 0 (unknown) The type is defined in FC-GS-2. 1 (nPort) The type is defined in FC-GS-2. 2 (nlPort) The type is defined in FC-GS-2. Access Read-only Status Mandatory Description The type of port for this entry.
4 FCSwitch MIB Object Types swNsNodeName [swNsLocalTable] Syntax FcWwn Access Read-only Status Mandatory Description The Fibre Channel WWN of the associated node as defined in FC-GS-2. swNsNodeSymb [swNsLocalTable] Syntax Octet String of size 0 to 255 Access Read-only Status Mandatory Description The contents of a Symbolic Name of the node associated with the entry.
FCSwitch MIB Object Types 4 swNsCos [swNsLocalTable] Syntax Value Declaration Integer 0 (class-unknown) Description 1 (class-F) 2 (class-1) 3 (class-F-1) 4 (class-2) 5 (class-F-2) 6 (class-1-2) 7 (class-F-1-2) 8 (class-3) 9 (class-F-3) 10 (class-1-3) 11 (class-F-1-3) 12 (class-2-3) 13 (class-F-2-3) 14 (class-1-2-3) 15 (class-F-1-2-3) Access Read-only Status Mandatory Description The class of services supported by the port.
4 FCSwitch MIB Object Types swNsIpNxPort [swNsLocalTable] Syntax Octet String of size 16 Access Read-only Status Mandatory Description The object identifies IpAddress of the Nx_port for the entry. swNsWwn [swNsLocalTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description The object identifies the World Wide Name (WWN) of the Fx_port for the entry.
FCSwitch MIB Object Types 4 The Event Group (To Map the errLog) Note: Logically, the swEventTable is separate from the error log since it is essentially a view of the error log within a particular time window. The value of swEventIndex shall indicate the event number that has occurred since the switch booted. The values range from 1 through 2147383647 (2^31 - 1).
4 FCSwitch MIB Object Types sw Event Table swEventTable Syntax Sequence of SwEventEntry Access Not accessible Status Description Mandatory The table of event entries. swEventEntry [swEventTable] Syntax SwEventEntry Access Not accessible Status Description Index Mandatory An entry of the event table.
FCSwitch MIB Object Types 4 swEventTimeInfo [swEventTable] Syntax Display String Access Read-only Status Mandatory Description The date and time when this event occurred. Note: The return string is displayed using the following format: ddd MMM DD hh:mm:ss Where: ddd = Day MMM = Month DD = Date hh = Hour mm = Minute ss = Seconds For example: Thu Aug 17 15:16:09.
4 FCSwitch MIB Object Types swEventDescr [swEventTable] Syntax Display String Access Read-only Status Mandatory Description A textual description of the event. Note: The return string is displayed using the following format: taskId (taskname) errorname description Where: taskId = FOS taskId in hex. taskname = FOS taskname that generated this event. errorname = category-subcategory (for example, SYS-BOOT) description = Textual description of the event.
FCSwitch MIB Object Types 4 The Fabric Watch Group Note: The Fabric Watch group contains one license scalar and two tables. • • • The license scalar, swFwFabricWatchLicense, is used to tell is if the switch has proper license for Fabric Watch. One table, Fabric Watch Class Area Table on page 4-53, contains classArea information such as threshold unit string, time base, low thresholds, and so forth.
4 FCSwitch MIB Object Types swFwClassAreaEntry [swFwClassAreaTable] Syntax SwFwClassAreaEntry Access Not accessible Status Description Index Mandatory An entry of the classes and areas.
FCSwitch MIB Object Types 4 swFwClassAreaIndex [swFwClassAreaTable] Syntax SwFwClassesAreas Access Read-only Status Mandatory Description This index represents the Fabric Watch classArea combination. swFwWriteThVals [swFwClassAreaTable] Syntax SwFwWriteVals Access Read-write Status Mandatory Description This applies or cancels the configuration value changes. Note: For a read operation, the return value is always swFwCancelWrite.
4 FCSwitch MIB Object Types swFwDefaultTimebase [swFwClassAreaTable] Syntax SwFwTimebase Access Read-only Status Mandatory Description A default polling period for the Fabric Watch classArea combination. For example: • • swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area). swFwDefaultLow [swFwClassAreaTable] Syntax Integer Access Read-only Status Mandatory Description A default low threshold value.
FCSwitch MIB Object Types 4 swFwCustUnit [swFwClassAreaTable] Syntax Display String of size 0 to 256 Access Read-write Status Mandatory Description A customizable unit string name, used to identify the unit of measure for a Fabric Watch classArea combination. For example: • • C = environment (class), temperature (area). RPM = environment (class), fan (area).
4 FCSwitch MIB Object Types swFwCustBufSize [swFwClassAreaTable] Syntax Integer Access Read-write Status Mandatory Description A customizable buffer size value for a Fabric Watch ClassArea combination. swFwThLevel [swFwClassAreaTable] Syntax SwFwLevels Access Read-write Status Mandatory Description swFwThLevel is used to point to the current level for classArea values. It is either default or custom Note: For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom).
FCSwitch MIB Object Types 4 swFwWriteActVals [swFwClassAreaTable] Syntax SwFwWriteVals Access Read-write Status Mandatory Description This applies or cancels the alarm value changes. Note: For a read operation, the return value is always swFwCancelWrite. The following are the custom alarm variables that can be modified.
4 FCSwitch MIB Object Types swFwDefaultBelowActs [swFwClassAreaTable] Syntax SwFwActs Access Read-only Status Mandatory Description Default action matrix for below event. swFwDefaultAboveActs [swFwClassAreaTable] Syntax SwFwActs Access Read-only Status Mandatory Description Default action matrix for above event. swFwDefaultInBetweenActs [swFwClassAreaTable] Syntax SwFwActs Access Read-only Status Mandatory Description Default action matrix for in-between event.
FCSwitch MIB Object Types 4 swFwCustBelowActs [swFwClassAreaTable] Syntax SwFwActs Access Read-write Status Mandatory Description Custom action matrix for below event. swFwCustAboveActs [swFwClassAreaTable] Syntax SwFwActs Access Read-write Status Mandatory Description Custom action matrix for above event. swFwCustInBetweenActs [swFwClassAreaTable] Syntax SwFwActs Access Read-write Status Mandatory Description Custom action matrix for in-between event.
4 FCSwitch MIB Object Types swFwActLevel [swFwClassAreaTable] Syntax SwFwLevels Access Read-write Status Mandatory Description swFwActLevel is used to point to the current level for classArea values. It is either default or custom Note: For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
FCSwitch MIB Object Types 4 swFwThresholdEntry [swFwThresholdTable] Syntax SwFwThresholdEntry Access Not accessible Status Description Index Mandatory An entry of an individual threshold.
4 FCSwitch MIB Object Types swFwThresholdIndex [swFwThresholdTable] Syntax Integer Access Read-only Status Mandatory Description Represents the element index of a threshold. Note: For environment class, the indexes are from 2 through (number of environment sensors+1).
FCSwitch MIB Object Types 4 swFwName [swFwThresholdTable] Syntax Display String of size 0 to 32 Access Read-only Status Mandatory Description Name of the threshold. For examples, see the table below.
4 FCSwitch MIB Object Types Table 1 swFwName Threshold Names (Continued) fcuportProtoErr0 FCU Port Protocol Errors 13 fcuportRXPerf013 FCU Port RX Performance 13 fcuportSignal013 FCU Port Loss of Signal 13 fcuportState013 FCU Port State Changes 13 fcuportSync013 FCU Port Loss of Sync 13 fcuportTXPerf013 FCU Port TX Performance 13 fcuportWords013 FCU Port Invalid Words 13 portCRCs000 Port Invalid CRCs 0 Port Invalid CRCs 0 portLink000 Port Link Failures 0 portProtoErr000 Port Protocol Erro
FCSwitch MIB Object Types 4 swFwCurVal [swFwThresholdTable] Syntax Integer Access Read-only Status Mandatory Description Current counter of the threshold. swFwLastEvent [swFwThresholdTable] Syntax SwFwEvent Access Read-only Status Mandatory Description Last event type of the threshold. swFwLastEventVal [swFwThresholdTable] Syntax Integer Access Read-only Status Mandatory Description Last event value of the threshold.
4 FCSwitch MIB Object Types swFwBehaviorType [swFwThresholdTable] Syntax SwFwBehavior Access Read-write Status Mandatory Description A behavior of which the thresholds generate event. swFwBehaviorInt [swFwThresholdTable] Syntax Integer Access Read-write Status Mandatory Description 4-68 A integer of which the thresholds generate continuous event. MIB Reference Manual Version 3.
FCSwitch MIB Object Types 4 End Device Group End Device Rls Table swEndDeviceRlsTable Syntax Sequence of SwEndDeviceRlsEntry Access Not accessible Status Description Mandatory The table of rls for individual end devices. MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types swEndDeviceRlsEntry [swEndDeviceRlsTable] Syntax SwEndDeviceRlsEntry Access Not accessible Status Description Index Mandatory An entry of an individual end devices' rls.
FCSwitch MIB Object Types 4 swEndDevicePortID [swEndDeviceRlsTable] Syntax Octet String of size 4 Access Read-only Status Mandatory Description The Fibre Channel port address ID of the entry. swEndDeviceLinkFailure [swEndDeviceRlsTable] Syntax Integer Access Read-only Status Mandatory Description Link failure count for the end device. swEndDeviceSyncLoss [swEndDeviceRlsTable] Syntax Integer Access Read-only Status Mandatory Description Sync loss count for the end device.
4 FCSwitch MIB Object Types swEndDeviceInvalidWord [swEndDeviceRlsTable] Syntax Integer Access Read-only Status Mandatory Description Invalid word count for the end device. swEndDeviceInvalidCRC [swEndDeviceRlsTable] Syntax Integer Access Read-only Status Mandatory Description 4-72 Invalid CRC count for the end device. MIB Reference Manual Version 3.
FCSwitch MIB Object Types 4 Bloom Performance Monitoring Group Bloom Performance ALPA Monitoring Table swBlmPerfALPAMntTable Syntax Sequence of SwBlmPerfALPAMntEntry Access Not accessible Status Description Mandatory ALPA monitoring counter Table. swBlmPerfALPAMntEntry Syntax SwBlmPerfALPAMntEntry Access Not accessible Status Description Index Mandatory ALPA monitoring counter for given ALPA.
4 FCSwitch MIB Object Types swBlmPerfAlpaIndx [swBlmPerfALPAMntTable] Syntax Integer (1..126) Access Read-only Status Mandatory Description This Object identifies the ALPA index. There can be 126 ALPA values. swBlmPerfAlpa [swBlmPerfALPAMntTable] Syntax Integer Access Read-only Status Mandatory Description This Object identifies the ALPA values.These values range between x'01' and x'EF'(1 to 239).
FCSwitch MIB Object Types 4 swBlmPerfEEMntEntry Syntax swBlmPerfEEMntEntry Access Not accessible Status Description Index Mandatory End-to-End monitoring counter for given port.
4 FCSwitch MIB Object Types swBlmPerfEECRC [swBlmPerfEEMntTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description End to End CRC error for the frames that matched the SID-DID pair. swBlmPerfEEFCWRx [swBlmPerfEEMntTable] Syntax Octet String of size 8 Access Read-only Status Mandatory Description Get End to End count of Fibre Channel words (FCW), received by the port, that matched the SID-DID pair.
FCSwitch MIB Object Types 4 swBlmPerfEEDid [swBlmPerfEEMntTable] Syntax Integer Access Read-only Status Mandatory Description Gets SID info by reference number. SID (Source Identifier) is a 3-byte field in the frame header used to indicate the address identifier of the N-Port from which the frame was sent.
4 FCSwitch MIB Object Types swBlmPerfFltPort [swBlmPerfFltMntTable] Syntax SwPortIndex Access Not accessible Status Description Mandatory This object identifies the port number of the switch. swBlmPerfFltRefkey [swBlmPerfFltMntTable] Syntax Integer (1..8) Access Read-only Status Mandatory Description This object identifies the reference number of the filter. This reference number is assigned when a filter is created. In SNMP Index start one instead of 0, add one to actual ref key.
FCSwitch MIB Object Types 4 Trunking Group Trunking Scaler swSwitchTrunkable Syntax Value Declaration Integer 0 (No) Description 8 (Yes) Access Status Description Not accessible Mandatory The trunking status of the switch - whether the switch supports the trunking feature or not. MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types Trunking Table swTrunkTable Syntax Sequence of SwTrunkEntry Access Not accessible Status Description Mandatory Table to display trunking information for the switch. swTrunkEntry Syntax SwTrunkEntry Access Not accessible Status Description Index Mandatory Entry for the trunking table.
FCSwitch MIB Object Types 4 swTrunkPortIndex [swTrunkTable] Syntax Value Declaration Integer 1 (portNum-0) Description 2 (portNum-1) 3(portNum-2) 4(portNum-3) 5(portNum-4) 6(portNum-5) 7(portNum-6) 8(portNum-7) 9(portNum-8) 10 (portNum-9) 11 (portNum-10) 12 (portNum-11) 13 (portNum-12) 14 (portNum-13) 15 (portNum-14) 16 (portNum-15) Access Read-only Status Mandatory Description This object identifies the switch port index. Note: MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types swTrunkGroupNumber [swTrunkTable] Syntax Integer Access Read-only Status Mandatory Description This object is a logical entity which specifies the Group Number to which the port belongs to. If this value is Zero it means the port is not trunked.
FCSwitch MIB Object Types 4 swPortTrunked [swTrunkTable] Syntax Value Declaration Integer 0 (Disabled) Description 1(Enabled) Access Read-only Status Mandatory Description The current state of trunking for a member port. Trunking Group Table swTrunkGrpTable Syntax Sequence of SwTrunkGrpEntry Access Not accessible Status Description Mandatory Table to display trunking performance information for the switch.
4 FCSwitch MIB Object Types swTrunkGrpNumber [swTrunkGrpTable] Syntax Integer Access Read-only Status Mandatory Description This object is a logical entity which specifies the Group Number to which port belongs.
FCSwitch MIB Object Types 4 swTrunkGrpTx [swTrunkGrpTable] Syntax Integer Access Read-only Status Mandatory Description Gives the aggregate value of the transmitted words from this TrunkGroup. swTrunkGrpRx [swTrunkGrpTable] Syntax Integer Access Read-only Status Mandatory Description Gives the aggregate value of the received words by this TrunkGroup. MIB Reference Manual Version 3.
4 FCSwitch MIB Object Types sw Trap Types This subsection contains descriptions and other information that is specific to sw Trap types. This chapter provides information on: • • • sw Traps on page 4-86 Traps for Fabric Watch Subsystems on page 4-89 Traps for Track Changes Subsystems on page 4-90 sw Traps swFault Enterprise Variables Description 4-86 sw swDiagResult A 1 (swFault) is generated whenever the diagnostics detects a fault with the switch. #TYPE Switch is faulty.
FCSwitch MIB Object Types 4 swSensorScn (Obsoleted by swFabricWatchTrap) Enterprise Variables Description sw swSensorStatus, swSensorIndex, swSensorType, swSensorValue, swSensorInfo A 2 (swSensorScn) is generated whenever an environment sensor changes its operational state. For instance, a fan stop working. The VarBind in the Trap Data Unit shall contain the corresponding instance of the sensor status, sensor index, sensor type, sensor value (reading) and sensor information.
4 FCSwitch MIB Object Types swEventTrap Enterprise Variables Description 4-88 sw swEventIndex, swEventTimeInfo, swEventLevel, swEventRepeatCount, swEventDescr This trap is generated when an event occurs, with a level that is at or below swEventTrapLevel. #TYPE A firmware event has been logged #SUMMARY Event %d: %s (severity level %d) - %s #ARGUMENTS 0, 1, 2, 4 #SEVERITY Informational #TIMEINDEX 1 #STATE Operational MIB Reference Manual Version 3.
FCSwitch MIB Object Types 4 Traps for Fabric Watch Subsystems swFabricWatchTrap Enterprise Variables sw swFwClassAreaIndex on page 4-55 swFwThresholdIndex on page 4-64 swFwName on page 4-65 swFwLabel on page 4-66 swFwLastEvent on page 4-67 swFwLastEventVal on page 4-67 swFwLastEventTime on page 4-67 swFwLastState on page 4-67 Description Trap to be sent by Fabric Watch to notify of an event. #TYPE Fabric Watch has generated an event.
4 FCSwitch MIB Object Types Traps for Track Changes Subsystems swTrackChangesTrap Enterprise Variables Description 4-90 sw swTrackChangesInfo Trap to be sent for tracking login/logout/configuration changes. #TYPE Track changes has generated a trap. #SUMMARY %s #ARGUMENTS 0 #SEVERITY Informational #TIMEINDEX 1 #STATE Operational MIB Reference Manual Version 3.
Appendix MIB Functional Groupings A Overview This appendix provides a function-based listing of MIB objects.
A MIB Functional Groupings Port Variables MIB variables that assist in monitoring or modifying ports are in the following tables or groups: Variables for State and Status • • • • • • Connectivity Unit Port Table in Fibre Alliance MIB Object Types on page 2-29 FxPort Configuration Table in FCFabric Element MIB Object Types on page 3-13 FxPort Operation Table in FCFabric Element MIB Object Types on page 3-20 FxPort Physical Level Table in FCFabric Element MIB Object Types on page 3-23 Fx Port Capability T
MIB Functional Groupings A ISL and End Device Variables MIB variables that assist in monitoring or modifying ISL and end-devices are in the following tables or groups: ISL Variables • • Connectivity Unit Link Table in Fibre Alliance MIB Object Types on page 2-50 The Fabric Group in FCSwitch MIB Object Types on page 4-24 End Device Variables • • • Connectivity Unit Link Table in Fibre Alliance MIB Object Types on page 2-50 FxPort Fabric Login Table in FCFabric Element MIB Object Types on page 3-27 The
A A-4 MIB Functional Groupings MIB Reference Manual Version 3.
Glossary 8b/10b Encoding An encoding scheme that converts each 8-bit byte into 10 bits. Used to balance ones and zeros in high-speed transports. Address Identifier A 24-bit or 8-bit value used to identify the source or destination of a frame. Advanced Performance Monitoring A software product that provides error and performance information to the administrator and end user for use in storage management.
BER Bit Error Rate; the rate at which bits are expected to be received in error. Expressed as the ratio of error bits to total bits transmitted. See also Error. Block As applies to Fibre Channel, upper-level application data that is transferred in a single sequence. Broadcast The transmission of data from a single source to all devices in the fabric, regardless of zoning. See also Multicast, Unicast.
Disparity The relationship of ones and zeros in an encoded character. “Neutral disparity” means an equal number of each, “positive disparity” means a majority of ones, and “negative disparity” means a majority of zeros. Distributed Fabrics The combined user’s guides for the software products Extended Fabrics and Remote Switch. “Distributed Fabrics” is not a software product. See also Extended Fabrics, Remote Switch. DLS Dynamic Load Sharing; dynamic distribution of traffic over available paths.
Fabric Manager A software product that works in conjunction with Web Tools to provide a graphical user interface for managing switch groups as a single unit, instead of as separate switches. Fabric Manager is installed on and run from a computer workstation. Fabric Name The unique identifier assigned to a fabric and communicated during login and port discovery. Fabric OS Operating system on HP Brocade switches.
FSPF Fabric Shortest Path First. Routing protocol for Fibre Channel switches. Full-duplex A mode of communication that allows the same port to simultaneously transmit and receive frames. See also Half-duplex. Fx_Port A fabric port that can operate as either an F_Port or FL_Port. See also F_Port, FL_Port. G_Port Generic Port; a port that can operate as either an E_Port or F_Port. A port is defined as a G_Port when it is not yet connected or has not yet assumed a specific function in the fabric.
JBOD Just a Bunch Of Disks; indicates a number of disks connected in a single chassis to one or more controllers. See also RAID. K28.5 A special 10-bit character used to indicate the beginning of a transmission word that performs Fibre Channel control and signaling functions. The first seven bits of the character are the comma pattern. See also Comma. L_Port Loop Port; a node port (NL_Port) or fabric port (FL_Port) that has arbitrated loop capabilities.
Multimode A fiber optic cabling specification that allows up to 500 meters between devices. N_Port Node Port; a port on a node that can connect to a Fibre Channel port or to another N_Port in a point-to-point connection. See also NL_Port, Nx_Port. Name Server Frequently used to indicate Simple Name Server. See also SNS. NL_Port Node Loop Port; a node port that has arbitrated loop capabilities. Used to connect an equipment port to the fabric in a loop configuration through an FL_Port.
Private Device A device that supports arbitrated loop protocol and can interpret 8-bit addresses, but cannot log into the fabric. Private Loop An arbitrated loop that does not include a participating FL_Port. Protocol A defined method and a set of standards for communication. Public NL_Port An NL_Port that logs into the fabric, can function within either a public or a private loop, and can communicate with either private or public NL_Ports.
SI Sequence Initiative. Single Mode The fiber optic cabling standard that corresponds to distances of up to 10 km between devices. SNMP Simple Network Management Protocol. An internet management protocol that uses either IP for network-level functions and UDP for transport-level functions, or TCP/IP for both. Can be made available over other protocols, such as UDP/IP, because it does not rely on the underlying communication protocols. See also Community (SNMP).
U_Port Universal Port; a switch port that can operate as a G_Port, E_Port, F_Port, or FL_Port. A port is defined as a U_Port when it is not connected or has not yet assumed a specific function in the fabric. UDP User Datagram Protocol; a protocol that runs on top of IP and provides port multiplexing for upper-level protocols. ULP Upper-level Protocol; the protocol that runs on top of Fibre Channel. Typical upper-level protocols are SCSI, IP, HIPPI, and IPI.
