Web Tools User's Guide (Version 3.0)

Web Tools User’s Guide 3-27
Fabric View
3
Quick Loop
You can use the QuickLoop tab to create and manage QuickLoops if used in conjunction with
Zoning. For information on managing the QuickLoop feature separately, see Loop Tab in this
document.
The Quick Loop tab is shown in Figure 3-15.
Search Mem Click to search for a Switch name, WWN, Alias, Zone, QuickLoop, in
the Member Selection List based on the type of objects displayed in
that list.
Add Mem Click to add a member from the Member Selection list into the Zone
Member contents.
Remove Mem Click to remove a member from the Zone Member list.
Add WWN Click to add a WWN that is not currently part of the Fabric.
Ref Zone Click to refresh the local zoning data base copied from the switch.
This button automatically flashes red/gray if the fabric zoning data is
changed by another client.
A/D WWN Click to add or delete a WWN to or from all the aliases, zones defined
Rpl WWN Click to replace WWN with another one in all aliases, zones defined.
OK Click to apply the changes to the switch and exit the switch.
Apply Click to apply the changes to the switch.
Close Click to exit the window without making any changes to the switch.
Clr All Click to clear all aliases, zones, configs locally on the switch.