hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

1–6 fca2355 dual channel PCI host bus adapter installation guide
Introduction
Operational Requirements
The following power, media, and environmental conditions are required for proper
HBA operation.
Voltage and PCI Slot Requirements
Table 1–2 describes the Voltage and minimum PCI slot requirements for the FCA2355
and previously released HP HBAs for Windows platforms.
NOTE: Refer to your HP Proliant server PCI slot specifications to determine whether your server and
the HBA are compatible.
Fibre Optic Cable Requirements
Use multimode fibre optic cable used with short-wave lasers. Refer to the hp
StorageWorks fca2355 dual channel PCI host bus adapter release notes for HP
supported optic cables.
Environmental Conditions
• Operating Temperature: 0° to 45° C (32° to 113° F)
• Airflow required: 100 lf/m
• Storage Temperature: -40° to 70° C (-40° to 158° F)
• Relative Humidity: 5% to 95% non-condensing
Table 1–2: Voltage and Minimum HBA PCI Slot Requirements
HBA Part
Number
HBA Voltage
Requirement
HBA PCI
Signaling Voltage
PCI
Slot Type
FCA2355
308540-B21
3.3 VDC 3.3 volt, 5 volt
Tolera nt
Universal PCI
connector
FCA2101
245299-B21
3.3 VDC 3.3 volt, 5 volt
Tolera nt
Universal PCI
connector
DS-KGPSA-CB
176479-B21
5 VDC 3.3 volt, 5 volt
Tolera nt
5 volt only universal
PCI connector