hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

fca2355 dual channel PCI host bus adapter installation guide 2–3
Installation
Verifying the Installation
To verify the HBA is properly installed and is operating:
1. Turn on the computer.
2. At power up, observe the POST LED indicators on the HBA. The position of the
POST LED indicators is defined in Figure 1–1 and Table 1–1 of this guide. The
green LED indicates power functions and the amber LED signifies port activity.
The amber LED blinks at all times during normal operation. Table 2–1 lists
normal LED indications.
Configuration Guidelines
The software for loading the driver also contains the default registry parameter
settings that are loaded as part of the driver installation. Consult the following sources
for any restriction and for information on supported configurations specific to your
operating system and topology.
• Release Notes
• HP website at: http://thenew.hp.com/country/us/eng/support.html
.
Table 2–1: Normal POST LED Indicators
Amber LED (L1) Green LED (L2) State
Off Flashing
(irregular)
POST processing in progress
Slow blink (1 Hz) On Normal 1 Gb link rate
Fast blink (4 Hz) On Normal 2 Gb link rate
Off Slow blink (1 Hz) Normal (link down or not yet
started)