hp StorageWorks fca2355 dual channel PCI host bus adapter - installation guide

3–2 fca2355 dual channel PCI host bus adapter installation guide
Installing the SCSI Miniport Driver
Installing the Windows NT SCSI Miniport Driver
Use the following procedure to installing the SCSI device driver and registry
parameters for the first time.
From the Windows NT desktop:
1. Click Start > Settings > Control Panel.
2. Double click the SCSI Adapters icon.
3. Select the Drivers tab.
4. Click Add.
5. Click Have Disk and select the location of the HBA kit.
6. Select the Fibre Channel SCSI driver and then click OK.
7. Click Install and continue to install the driver.
8. Reboot the computer to restart Windows NT.
9. Verify the driver installation from the Windows NT desktop:
a. Click Start > Settings > Control Panel.
b. Double click the SCSI Adapters icon.
c. Select the Drivers tab. Verify that the SCSI Miniport driver is present and
started.
d. Select the Default tab. Verify that the HBA is present.
e. Click the plus symbol (+) to expand the adapter list. Verify that the connected
storage device is listed.
Removing the Windows NT SCSI Device Driver
To remove the device driver from the Windows NT desktop:
1. Click Start > Settings > Control Panel.
2. Double click the SCSI Adapters icon.
3. Select the Drivers tab.
4. Click Remove, and select Yes to confirm.
5. Click OK.
6. Reboot the computer to restart Windows NT.